Something to think about.. Can't wait to see some pics!!

Where do you live Thomas??

 

Im in shenandoah, virginia (just outside of harrisonburg).. so about 2 hours southwest of DC

 

ok, how hard was this to do? I have been contemplating selling my HD heads and doing this except going with the black on the inside of the lightnings.

 

JP,
On a scale of 1 to 10, i'd probably give it an 8. its not really hard, just a bit time consuming. But if you dont mind cutting into your truck, most anyone who has the skills and tools to install a lift kit and a stereo system should be able to the retrofit.

More How-to info added

 

Well here we go with the pictures...

Stock headlights and Silver-stars. Low beams first, hi beams 2nd:



Hid Projectors w/ the truck in the same spot. tree = 25' away, building = 50' away:
Again. low beam first, high beam 2nd.



Now i've got these showing the cut-off line and the high beam as well.. Building is now 25'. Cutoff line is aimed 3" below center point of projector.




Some exterior shots of the low beams.. I couldn't get a high-beam shot as its to damn bright to stand infront of, even 50 feet away.

 

OMG! I think I need to clean my keyboard. Sick!

 

definitely have to do this ASAP

 

next NEED to do mod right here.

great job!

 

That's super sik! I'll be talking to you soon!!

 

those look great

 

hell yea thats perfect!

 

If anyone is interested, i think i'll offer retrofits for anyone interested. $200 for labor and you all supply the lights and TRS HID kit. Turn around should be about a week or less.

 

Have you thought about doing anything for the corners? and can we see pics in the daylight without the lights on. Thanks!

 

Only thing i can think of doing for the corners, is a clear bulb... got any suggestions?

I had intentions on putting some HID's in the fogs, but the HID light wave spectrum is horrible for fog-light use, so i'll just stick with the halogens.


Day light pics w/o lights:

 

Hi and Low-beam issue is now fixed. the guys over at TRS told me to swap the 2 outer pins in the connector that plugs into the factory headlight connector. Once i did this, the low beams were low, and the hi beams were hi's. All is good