4.2 supercharger

Thread Tools
 
Search this Thread
 
Old Jul 7, 2008 | 11:24 PM
  #1  
Tx_Heritage's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 2
Likes: 0
From: Waco TX
4.2 supercharger

dont know if theres one out there but if there is someone shoot me a link plz
 
Reply
Old Jul 8, 2008 | 12:49 AM
  #2  
x_sgs_x's Avatar
Senior Member
Joined: May 2008
Posts: 145
Likes: 0
From: NC
I dont have a link, but i know ssm sells an adapter plate to fit a m112 of a cobra on top
 
Reply
Old Jul 8, 2008 | 01:31 AM
  #3  
97XL's Avatar
Senior Member
Joined: Jul 2007
Posts: 946
Likes: 0
From: London, ON Canada
Vortech used to make a kit for the 4.2L but not sure if they still do. The adapter plate from www.supersixmotorsports.com is about $900. If you got the tools and know-how you could prolly make your own box. The M112 will mount up but there could be a clearance issue with the top of the firewall just under the cowl.
 
Reply
Old Jul 8, 2008 | 01:36 AM
  #4  
4.2trimble's Avatar
Senior Member
Joined: Dec 2007
Posts: 5,966
Likes: 0
From: Tampa, FL
theres only 1 kit and its Need-4-Speed they are located near me and i looked into their kit and its junk no one knew what they where talking about, and could never keep their stories straight.

First person i talked to told me that i would not need to dyno tune. they said they would tune it though my xcal2 or a chip! and also told me that there would be NO performance gains from dyno tuning! the price was 4,550 and that was not with install!
 
Reply
Old Jul 8, 2008 | 03:40 PM
  #5  
Raptor05121's Avatar
Technical Article Contributor
Joined: Jan 2007
Posts: 10,610
Likes: 7
From: Live Oak, FL
you might be better off T/C'ing a 4.2
 
Reply




All times are GMT -4. The time now is 12:29 AM.