F150online Forums
10112 14339 197099
10112 14339 197099
0 2010/05/10 10:11:51
10112 14339 197098
10112 14339 197098
0 2010/05/10 10:11:51
10112 14339 197097
10112 14339 197097
0 2010/05/10 10:11:51
10112 14339 197096
10112 14339 197096
0 2010/05/10 10:11:51
10112 14339 196966
10112 14339 196966
0 2010/05/10 10:11:51
10112 14339 196965
10112 14339 196965
0 2010/05/10 10:11:51
10112 14339 196964
10112 14339 196964
0 2010/05/10 10:11:51
10112 14339 196955
10112 14339 196955
0 2010/05/10 10:11:51
10112 14339 196954
10112 14339 196954
0 2010/05/10 10:11:51
10112 14339 196953
10112 14339 196953
0 2010/05/10 10:11:51
10112 14339 196952
10112 14339 196952
0 2010/05/10 10:11:51
10112 14339 196951
10112 14339 196951
0 2010/05/10 10:11:51
10112 14339 197104
10112 14339 197104
0 2010/05/07 16:02:07
10112 14339 197103
10112 14339 197103
0 2010/05/07 16:02:07
10112 14339 197102
10112 14339 197102
0 2010/05/07 16:02:07
10112 14339 197101
10112 14339 197101
0 2010/05/07 16:02:07
10112 14339 197100
10112 14339 197100
0 2010/05/07 16:02:07
10112 14339 197099
10112 14339 197099
0 2010/05/07 16:02:07
10112 14339 197098
10112 14339 197098
0 2010/05/07 16:02:07
10112 14339 197097
10112 14339 197097
0 2010/05/07 16:02:07
10112 14339 197096
10112 14339 197096
0 2010/05/07 16:02:07
10112 14339 196966
10112 14339 196966
0 2010/05/07 16:02:07
10112 14339 196965
10112 14339 196965
0 2010/05/07 16:02:07
10112 14339 196964
10112 14339 196964
0 2010/05/07 16:02:07
10112 14339 196955
10112 14339 196955
0 2010/05/07 16:02:07
10112 14339 196954
10112 14339 196954
0 2010/05/07 16:02:07
10112 14339 196953
10112 14339 196953
0 2010/05/07 16:02:07
10112 14339 196952
10112 14339 196952
0 2010/05/07 16:02:07
10112 14339 196951
10112 14339 196951
0 2010/05/07 16:02:07
Edge mount hole in ashtray case A little off topic... this is the hole I made in the ashtray case to feed the wires through. (2 wires shown right now as the GPS wire is also feeding through... this was before I added the hidden connector)
Edge mount hole in ashtray case A little off topic... this is the hole I made in the ashtray case to feed the wires through. (2 wires shown right now as the GPS wire is also feeding through... this was before I added the hidden connector)
0 2009/03/17 08:55:31
Edge mount location Now its easy to see the Edge without the GPS power adapter sticking out. And the GPS automatically comes on/off with the truck key!
Edge mount location Now its easy to see the Edge without the GPS power adapter sticking out. And the GPS automatically comes on/off with the truck key!
0 2009/03/15 17:20:02
GPS wiring fastened I used a zip-tie to hold the power adapter down so it won't rattle or come loose.
GPS wiring fastened I used a zip-tie to hold the power adapter down so it won't rattle or come loose.
0 2009/03/15 17:20:02
GPS wiring connected The connector is attached and ready to tuck away.
GPS wiring connected The connector is attached and ready to tuck away.
0 2009/03/15 17:15:06
12V outlet wired I soldered the wires to the connectors and used shrink-tube to keep this all sealed up. The positive connector is in the very middle and totally covered by the shrink tube.
12V outlet wired I soldered the wires to the connectors and used shrink-tube to keep this all sealed up. The positive connector is in the very middle and totally covered by the shrink tube.
0 2009/03/15 17:15:06
GPS wiring4 wires taped and tied Since I didn't cut the original wire, I can't use shrink-tube. So I wrapped them with yellow electrical tape and then use a zip-tie to hold the wires together and to ensure that the tape stays on.
GPS wiring4 wires taped and tied Since I didn't cut the original wire, I can't use shrink-tube. So I wrapped them with yellow electrical tape and then use a zip-tie to hold the wires together and to ensure that the tape stays on.
0 2009/03/15 17:15:06
GPS wiring3 wires soldered Bulldog doesn't say to solder them, but I feel much better with them soldered. This ensures a solid connection that won't rattle loose or anything.
GPS wiring3 wires soldered Bulldog doesn't say to solder them, but I feel much better with them soldered. This ensures a solid connection that won't rattle loose or anything.
0 2009/03/15 17:15:06
GPS wiring2 wires wrapped together Stick the wire to connect through and then wrap it around.
GPS wiring2 wires wrapped together Stick the wire to connect through and then wrap it around.
0 2009/03/15 17:07:46
GPS wiring1 exposed wires I used a method given by Bulldog security... cut off the insulation but don't cut through the wire. Open up the strands so you can stick the other wire through.
GPS wiring1 exposed wires I used a method given by Bulldog security... cut off the insulation but don't cut through the wire. Open up the strands so you can stick the other wire through.
0 2009/03/15 17:07:46
GPS Mount location I like it over here because it doesn't take up windshield space. The wires are run under the dash.
GPS Mount location I like it over here because it doesn't take up windshield space. The wires are run under the dash.
2 2009/03/15 17:07:46
GPS wire old setup A little hard to see the Edge pod in the ex-ashtray. And its a pain plugging it in every time I get in the truck and then unplugging it when I get out. (why didn't Ford make one of the 12V outlets switched????)
GPS wire old setup A little hard to see the Edge pod in the ex-ashtray. And its a pain plugging it in every time I get in the truck and then unplugging it when I get out. (why didn't Ford make one of the 12V outlets switched????)
0 2009/03/15 17:07:46