F150online Forums
0 2016/01/04 20:29:38
0 2016/01/04 20:29:02
0 2016/01/04 20:22:00
0 2016/01/04 20:21:56
0 2016/01/03 10:19:18
0 2015/04/10 16:01:52
0 2015/04/10 16:00:03
0 2015/04/10 15:55:29
0 2015/04/10 15:54:27
0 2015/04/10 15:53:30
0 2015/03/29 14:00:58
0 2015/03/29 13:59:56
0 2015/03/29 13:57:33
0 2015/03/29 13:55:42
0 2015/03/29 13:55:03
0 2015/03/29 13:53:44
0 2015/03/29 13:53:03
0 2015/03/29 13:46:44
0 2015/03/29 13:46:10
0 2015/03/29 13:44:47
0 2014/11/02 16:24:59
0 2014/10/31 14:06:00
0 2014/10/31 14:05:53
0 2014/10/31 14:05:43
Complete and cleaned up.
Complete and cleaned up.
0 2014/06/01 15:21:25
Close up
Close up
0 2014/05/25 16:56:31
GT500 Heat Exchanger install complete. The Whipple part is on top and The other down at the bottom.
GT500 Heat Exchanger install complete. The Whipple part is on top and The other down at the bottom.
0 2014/05/25 16:40:46
Crusing at 73mph. Ambient temp 71. IAT's 86. A 13 degree improvement.
Crusing at 73mph. Ambient temp 71. IAT's 86. A 13 degree improvement.
0 2014/05/24 18:18:17
125mph 12psi and IAT's peaked at 110 degrees. A 16 degree improvement.
125mph 12psi and IAT's peaked at 110 degrees. A 16 degree improvement.
0 2014/05/24 18:12:35
123 mph. 12psi and IAT's reached 108 degrees
123 mph. 12psi and IAT's reached 108 degrees
0 2014/05/24 18:12:35
Installed. Have to make upper supports but ot's and functional.
Installed. Have to make upper supports but ot's and functional.
0 2014/05/24 18:08:20
Rear view
Rear view
0 2014/05/24 08:43:02
Part Number
Part Number
0 2014/05/24 08:43:02
Stock GT500 HE 07-12
Stock GT500 HE 07-12
0 2014/05/24 08:43:02
The stock Whipple/Fluidyne heat exchanger and the GT500 Heat exchanger laid out and ready to install.
The stock Whipple/Fluidyne heat exchanger and the GT500 Heat exchanger laid out and ready to install.
0 2014/05/24 08:17:55
8 rib with 90MM throttle body
8 rib with 90MM throttle body
0 2014/10/08 05:27:38
8 rib
8 rib
0 2014/10/08 05:27:38
stock 6 rib
stock 6 rib
0 2014/10/08 05:27:38
image
image
0 2014/08/10 10:46:57
Pulley and shaft
Pulley and shaft
0 2014/08/10 10:38:59