F150online Forums
0 2022/11/14 18:21:01
0 2022/11/14 18:20:57
0 2022/11/14 18:20:52
0 2022/11/14 18:20:46
0 2016/03/29 12:06:18
IMG 1440
IMG 1440
0 2010/08/25 11:15:22
IMG 1439
IMG 1439
0 2010/08/25 11:15:22
New nose job
New nose job
3 2010/08/25 11:15:22
IMG 1437
IMG 1437
2 2010/08/25 11:15:22
11237 16663 223861
11237 16663 223861
0 2010/05/12 10:33:45
11237 16663 223860
11237 16663 223860
0 2010/05/12 10:33:45
11237 16663 223859
11237 16663 223859
0 2010/05/12 10:33:45
11237 16663 223857
11237 16663 223857
0 2010/05/12 10:33:45
11237 16663 223858
11237 16663 223858
0 2010/05/12 10:33:45
IMG 5215
IMG 5215
0 2010/05/31 06:49:33
IMG 5195
IMG 5195
0 2010/05/31 06:49:33
IMG 5214
IMG 5214
0 2010/05/31 06:49:33
IMG 5211
IMG 5211
0 2010/05/31 06:47:39
IMG 5200
IMG 5200
0 2010/05/31 06:47:39
IMG 5193
IMG 5193
0 2010/05/31 06:47:39
No, its not all that bad if you make a mistake... if you do, just drill out the plastic piece - the kit I bought came with a bag full of these plastic pieces... just redrill in the right spot and get a new mounting piece out.
No, its not all that bad if you make a mistake... if you do, just drill out the plastic piece - the kit I bought came with a bag full of these plastic pieces... just redrill in the right spot and get a new mounting piece out.
0 2009/10/02 09:56:10
Here's the finished product looking forward
Here's the finished product looking forward
0 2009/10/02 09:51:46
here is the plastic mounting piece used to go in the holes to mount the gap guard with - works very well
here is the plastic mounting piece used to go in the holes to mount the gap guard with - works very well
0 2009/10/02 09:51:46
IMG 0316
IMG 0316
0 2009/10/02 09:51:46
mark your drill spot with a "seeable" marker
mark your drill spot with a "seeable" marker
0 2009/10/02 09:51:46
Although it looks as if the cutout on the gap guard will fit nicely around the block jut-out, it doesn't.... I just left mine wedged in like its shown here... I need to put a mounting piece in there to hold in place sometime in the future.
Although it looks as if the cutout on the gap guard will fit nicely around the block jut-out, it doesn't.... I just left mine wedged in like its shown here... I need to put a mounting piece in there to hold in place sometime in the future.
0 2009/10/02 09:46:45
IMG 0312
IMG 0312
0 2009/10/02 09:46:45
IMG 0311
IMG 0311
0 2009/10/02 09:46:45
IMG 0310
IMG 0310
0 2009/10/02 09:46:45
Back left
Back left
0 2009/10/02 09:41:56
Notice the predrilled hole in the gap guard fits nicely over the screw that's in that support peice
Notice the predrilled hole in the gap guard fits nicely over the screw that's in that support peice
0 2009/10/02 09:41:56
Here's the front all nice and covered up. Needs a trim though.
Here's the front all nice and covered up. Needs a trim though.
0 2009/10/02 09:41:56
The piece on the bottom left, where it sticks out... I took that screw that's facing upwards into the bracket there out and put it through the gap guard and back into the bracket.
The piece on the bottom left, where it sticks out... I took that screw that's facing upwards into the bracket there out and put it through the gap guard and back into the bracket.
0 2009/10/02 09:41:56
IMG 0302
IMG 0302
0 2009/10/02 09:36:46
IMG 0300
IMG 0300
0 2009/10/02 09:36:46
IMG 0299
IMG 0299
0 2009/10/02 09:36:46
IMG 0298
IMG 0298
0 2009/10/02 09:36:46
stuck
stuck
0 2009/12/10 14:07:51
stuck
stuck
0 2009/12/10 14:07:51
coming in to pull the truck out out
coming in to pull the truck out out
0 2009/12/10 14:07:51