Garage - F150

May 20, 2012

13

3

ScanGearII Install Location

ScanGearII Install Location

0 2012/06/12 10:45:17 Loomdog32

Map/Dome Lights Night Flash

Map/Dome Lights Night Flash

3 2012/06/12 10:45:17 Loomdog32

Map Lights Night No Flash

Map Lights Night No Flash

0 2012/06/12 10:45:17 Loomdog32

Front Floorboard Lights Night No Flash

Front Floorboard Lights Night No Flash

0 2012/06/12 10:45:17 Loomdog32

Audio Control 6XS
Arc Audio KS300.4
Arc Audio KS300.2

Audio Control 6XS Arc Audio KS300.4 Arc Audio KS300.2

0 2012/07/03 07:51:57 Loomdog32

JVC KW-AV60 w/ Bad Screen

JVC KW-AV60 w/ Bad Screen

0 2012/07/03 07:51:57 Loomdog32

Pioneer AVH-P3400BH Harness

Pioneer AVH-P3400BH Harness

0 2012/07/03 13:19:18 Loomdog32

To Remove the Radio Benzel, Put the benzel out from the dash. It is held in place by 8 clips.

It may be easier to open the cup holder and start from the bottom.

To Remove the Radio Benzel, Put the benzel out from the dash. It is held in place by 8 clips. It may be easier to open the cup holder and start from the bottom.

0 2012/07/13 09:28:40 Loomdog32

On the back of the top of the benzel, remove the Wire Harness for the Passenger Airbag Notification.

Press In on the Clip and Pull Out.

On the back of the top of the benzel, remove the Wire Harness for the Passenger Airbag Notification. Press In on the Clip and Pull Out.

0 2012/07/13 09:28:40 Loomdog32

On the back of the benzel, remove the Wire Harness for the AC Speed Selector.

Pull the Clip and Pull Out.

On the back of the benzel, remove the Wire Harness for the AC Speed Selector. Pull the Clip and Pull Out.

0 2012/07/13 09:28:40 Loomdog32

On the back of the benzel, remove the Wire Harness for the AC Controls.

Rotate the Gray Clip and Pull Out.

On the back of the benzel, remove the Wire Harness for the AC Controls. Rotate the Gray Clip and Pull Out.

0 2012/07/13 09:28:40 Loomdog32

The HU is secured with 4 - 7mm bolts.

Remove the bolts and Pull the HU out of the Dash.

The HU is secured with 4 - 7mm bolts. Remove the bolts and Pull the HU out of the Dash.

0 2012/07/13 09:33:01 Loomdog32

On the back of the Stock HU / Pigtail for Aftermarket Hu, Remove the Wire Harness.

Press In on the Clip and Pull Out.

On the back of the Stock HU / Pigtail for Aftermarket Hu, Remove the Wire Harness. Press In on the Clip and Pull Out.

0 2012/07/13 09:33:01 Loomdog32