F150online Forums
002
002
1 2009/12/14 17:31:56
025
025
1 2009/12/14 17:31:56
030
030
0 2009/12/14 17:31:56
034
034
0 2009/12/14 17:31:56
036
036
0 2009/12/14 17:40:39
040
040
0 2009/12/14 17:40:39
044
044
2 2009/12/14 17:40:39
046
046
0 2009/12/14 17:40:39
cp1 0828092050
cp1 0828092050
0 2009/12/14 17:51:11
Before the headers
Before the headers
0 2009/12/14 17:51:11
downsized 0828091719
downsized 0828091719
0 2009/12/14 17:51:11
001
001
2 2009/12/19 07:44:15
8lbs of boost
8lbs of boost
0 2010/01/19 18:59:22
Toys
Toys
0 2010/01/25 19:10:24
0207001216
0207001216
1 2010/02/07 09:28:25
Oh hell yeah
Oh hell yeah
0 2010/03/07 19:21:53
Troyer Dyno0001
Troyer Dyno0001
0 2010/06/05 20:50:26
0 2010/11/10 13:35:03
install of the 2010 f150 e-fans.
install of the 2010 f150 e-fans.
0 2010/11/10 13:35:03
tranny inline filter location
tranny inline filter location
0 2010/12/10 18:15:32
IMG00104 20110105 2055
IMG00104 20110105 2055
0 2011/01/05 18:13:28
Now sporting Nitto 420's in a 305 series
Now sporting Nitto 420's in a 305 series
1 2011/01/19 18:29:01
082
082
2 2011/01/19 18:29:01
Optima Installed
Optima Installed
0 2011/01/26 09:55:20
UPR Catch can
UPR Catch can
0 2011/02/27 18:02:04
0 2011/02/27 18:02:04
heat exchanger
heat exchanger
0 2011/03/11 16:45:56
EBC Brake kit. Seprate rotor and hub assembly for 2wd!!
EBC Brake kit. Seprate rotor and hub assembly for 2wd!!
0 2011/05/06 15:25:43
M&H Racemaster Drag 28x11.5x17
M&H Racemaster Drag 28x11.5x17
0 2011/05/12 14:30:58
IMAG0404no oil after after 5000 miles with a catch can installed
IMAG0404no oil after after 5000 miles with a catch can installed
0 2011/07/24 10:27:45
Stock throttle body
Stock throttle body
0 2011/07/24 10:27:45
An honest 80mm
An honest 80mm
0 2011/07/24 10:27:45
Boost, AF, and Pyrometer installed
Boost, AF, and Pyrometer installed
0 2011/07/24 10:30:37
EBC brakes
EBC brakes
0 2011/08/02 08:42:38
EBC Brakes
EBC Brakes
0 2011/08/02 08:42:38
Bracket for efan install. 1/4 alum flat bar. There are four mounting holes for the 2010 efans. This is the only one that doesn't line up with the existing radiator. Top drivers side.
Bracket for efan install. 1/4 alum flat bar. There are four mounting holes for the 2010 efans. This is the only one that doesn't line up with the existing radiator. Top drivers side.
0 2011/08/20 20:08:51
A view from directly above looking down at what must be cut away to make the fans fit around the abs module.
A view from directly above looking down at what must be cut away to make the fans fit around the abs module.
0 2011/08/20 20:08:51
Painless Controller Mounted to Battery cover
Painless Controller Mounted to Battery cover
0 2011/10/03 09:07:43
Toggle switch allows for manual operation if desired.
Toggle switch allows for manual operation if desired.
0 2011/10/03 09:07:43
IMAG0599
IMAG0599
0 2011/10/03 17:23:33