F150online Forums
F150 Sub Box - Draft Rev.1 Just trying to see what kind of volume I can roughly get out of my truck before I build the box and choose the subs. Many more to come I am sure!!!
F150 Sub Box - Draft Rev.1 Just trying to see what kind of volume I can roughly get out of my truck before I build the box and choose the subs. Many more to come I am sure!!!
0 2011/08/10 16:08:17
Speaker Box Design Model (ISOMETRIC)
Speaker Box Design Model (ISOMETRIC)
0 2011/08/11 16:53:33
Speaker Box Design Model (Clearances with speaker)
Speaker Box Design Model (Clearances with speaker)
0 2011/08/11 16:53:33
Sub Box Test Fit 2
Sub Box Test Fit 2
0 2011/08/11 16:53:33
Sub Box Test Fit 1 - Measure once, cut twice!?!?
Sub Box Test Fit 1 - Measure once, cut twice!?!?
0 2011/08/11 16:53:33
Speaker Box Design Model for .35 CF Box (Miter cuts detail sheet) NOTE: NOT THE BOX I ENDED UP BUILDING
Speaker Box Design Model for .35 CF Box (Miter cuts detail sheet) NOTE: NOT THE BOX I ENDED UP BUILDING
0 2011/08/24 09:41:20
Speaker Box Design Model for .35 CF Box (Profile w/ Dimensions) NOTE: NOT THE BOX I ENDED UP BUILDING
Speaker Box Design Model for .35 CF Box (Profile w/ Dimensions) NOTE: NOT THE BOX I ENDED UP BUILDING
0 2011/08/24 09:41:20
Sub Box Build 8-20-11 Box for SWR-T12 w/ .60 CF airspace
Sub Box Build 8-20-11 Box for SWR-T12 w/ .60 CF airspace
0 2011/08/24 09:41:20
1/0 Dual Amp Wiring Kit from KnuKonceptz (plus a few extra Knu goodies!!!) along with several other items for build
1/0 Dual Amp Wiring Kit from KnuKonceptz (plus a few extra Knu goodies!!!) along with several other items for build
0 2011/08/24 09:41:20
System Parts to date including wires, sub, amps, and LOC
System Parts to date including wires, sub, amps, and LOC
0 2011/08/24 09:50:43
Starting the sound deadening
Starting the sound deadening
0 2011/09/16 07:56:07
Close to completing the sound deadening
Close to completing the sound deadening
0 2011/09/16 07:56:07
Close to completing the sound deadening 2
Close to completing the sound deadening 2
0 2011/09/16 07:56:07
Sound deadening with foam to cover the rear passenger side vent
Sound deadening with foam to cover the rear passenger side vent
0 2011/09/16 07:56:07
Power wire through factory grommet
Power wire through factory grommet
0 2011/09/16 08:01:11
Running power wires from front to back
Running power wires from front to back
0 2011/09/16 08:01:11
1/0 power wire on air conditioned seats. Awesome feature BTW!!!
1/0 power wire on air conditioned seats. Awesome feature BTW!!!
0 2011/09/16 08:01:11
Power wire run in engine bay
Power wire run in engine bay
0 2011/09/16 08:18:43
Amp board #1 (3/4" MDF) .... Too many hours lost making this guy fit perfect, only to find that the seats will not lock in the upright position once the amps were put in
Amp board #1 (3/4" MDF) .... Too many hours lost making this guy fit perfect, only to find that the seats will not lock in the upright position once the amps were put in
0 2011/09/16 08:18:43
A must have DIY install for anyone getting behind their seats more than once!!!
A must have DIY install for anyone getting behind their seats more than once!!!
0 2011/09/16 08:18:43
Starting to run the 9 wire and installing the Metra harness
Starting to run the 9 wire and installing the Metra harness
0 2011/09/16 08:18:43
Nine conductor speed wire with crimp on connectors to be spliced into the Metra Harness
Nine conductor speed wire with crimp on connectors to be spliced into the Metra Harness
0 2011/09/16 08:26:56
Final arrangement and layout (wires run everywhere because I got impatient and wanted to hear sound and to see if it all worked before hacking up the wires)
Final arrangement and layout (wires run everywhere because I got impatient and wanted to hear sound and to see if it all worked before hacking up the wires)
0 2011/09/16 08:26:56
Passenger side with Power distribution block and 4 channel Cadence amp
Passenger side with Power distribution block and 4 channel Cadence amp
0 2011/09/16 08:26:56
Drivers side with Grounding block (grounded to middle-left seat bolt), LC6i and Cadence mono amp
Drivers side with Grounding block (grounded to middle-left seat bolt), LC6i and Cadence mono amp
0 2011/09/16 08:26:56
Rear window motor left as is :( Didn’t feel like messing with it ..... Those without the rear window motor are lucky as far as installing sh*T back here, but then again, I have a window back there and you don't so I guess it evens out!! ;)
Rear window motor left as is :( Didn’t feel like messing with it ..... Those without the rear window motor are lucky as far as installing sh*T back here, but then again, I have a window back there and you don't so I guess it evens out!! ;)
0 2011/09/16 08:36:54