F150online Forums
Tearing it apart: lower A-arms, knuckles, struts removed
Tearing it apart: lower A-arms, knuckles, struts removed
0 2011/04/19 20:03:36
Axle installed, new front lower A-arm mount installed
Axle installed, new front lower A-arm mount installed
0 2011/04/19 20:03:36
Nearly together, new struts were a TON of fun...
Nearly together, new struts were a TON of fun...
0 2011/04/19 20:03:36
Drivers side rear A-arm mount point needing to be cut off
Drivers side rear A-arm mount point needing to be cut off
0 2011/04/19 20:13:55
mount point cut off, axle in position needing bolts
mount point cut off, axle in position needing bolts
0 2011/04/19 20:13:55
Tires on!
Tires on!
0 2011/04/19 20:13:55
Lift on, rear not quite level. This has the stock block stacked on top of the 4 inch procomp block. The new procomp u-bolts were long enough. I used this until I got my add a leaf in. Not an ideal situation, never stack blocks.
Lift on, rear not quite level. This has the stock block stacked on top of the 4 inch procomp block. The new procomp u-bolts were long enough. I used this until I got my add a leaf in. Not an ideal situation, never stack blocks.
2 2011/04/19 20:13:55
somewhat assembled drivers side
somewhat assembled drivers side
0 2011/04/19 20:20:58
Starting the parts pile, this is when I asked myself "what have I done to my new truck?" Making it better!!!!
Starting the parts pile, this is when I asked myself "what have I done to my new truck?" Making it better!!!!
0 2011/04/19 20:20:58
Good shot of the ProComp coil overs with some powder coat
Good shot of the ProComp coil overs with some powder coat
0 2011/04/19 20:20:58
Vacuum lines extended
Vacuum lines extended
0 2011/04/19 20:20:58
Taking the stacked blocks out, adding the 2 inch add a leaf
Taking the stacked blocks out, adding the 2 inch add a leaf
0 2011/04/19 20:27:06
Stacked blocks: procomp 4 inch block and factory 1.5 inch block
Stacked blocks: procomp 4 inch block and factory 1.5 inch block
0 2011/04/19 20:27:06
This is the new 2 inch add a leaf, procomp 4 inch block and the 1/2 procomp shims. The shims are bolted to the leaf springs with the centering pins. I removed these, Truck didn't sit level.
This is the new 2 inch add a leaf, procomp 4 inch block and the 1/2 procomp shims. The shims are bolted to the leaf springs with the centering pins. I removed these, Truck didn't sit level.
0 2011/04/19 20:27:06
Pretty much how the truck sits now: LEVEL. Took some work but I'm very happy with it.
Pretty much how the truck sits now: LEVEL. Took some work but I'm very happy with it.
0 2011/04/19 20:27:06
Oh yea!
Oh yea!
0 2011/04/19 20:32:51