F150online Forums
Not to toot my own horn, but I didn't do such a bad job sanding and painting the Tow Mirror Caps.
Not to toot my own horn, but I didn't do such a bad job sanding and painting the Tow Mirror Caps.
0 2011/03/31 20:17:35
New Tow mirrors getting ready to be installed, the caps look awesome.
New Tow mirrors getting ready to be installed, the caps look awesome.
0 2011/03/31 20:17:35
Some more of the stuff used to sand and paint the Tow Mirror caps
Some more of the stuff used to sand and paint the Tow Mirror caps
0 2011/03/31 20:17:35
Products used to sand and paint the Tow Mirror caps
Products used to sand and paint the Tow Mirror caps
0 2011/03/31 20:17:35
The end product...these babies are bright.
The end product...these babies are bright.
0 2011/03/31 20:19:35
LED Swap being put in I used silicone to make sure it was sealed properly.
LED Swap being put in I used silicone to make sure it was sealed properly.
0 2011/03/31 20:19:35
LED swap
LED swap
0 2011/03/31 20:19:35
Original Puddle Lamp before LED Swap
Original Puddle Lamp before LED Swap
0 2011/03/31 20:20:40
This is what I used for LED lights. I bought these at Advance Auto Parts
This is what I used for LED lights. I bought these at Advance Auto Parts
0 2011/03/31 20:20:40
This is what I started with. I took of the clear bulb dome and all the surrounding black plastic
This is what I started with. I took of the clear bulb dome and all the surrounding black plastic
0 2011/03/31 20:20:40
2011 03 27 17.10.06
2011 03 27 17.10.06
0 2011/04/01 13:11:53
2011 03 27 17.07.33
2011 03 27 17.07.33
0 2011/04/01 13:11:53
2011 03 27 17.08.01
2011 03 27 17.08.01
0 2011/04/01 13:11:53
2011 03 27 17.09.07
2011 03 27 17.09.07
0 2011/04/01 13:11:53
2011 03 27 17.09.47
2011 03 27 17.09.47
0 2011/04/01 13:13:03
Drilled a 3/8 hole through the back which 1) broke the old bulb the inside and loosened the reflective shield inside since it's attached to the top, inside the puddle lamp. 2) shook the old bulb pieces out and installed the new LED.
Drilled a 3/8 hole through the back which 1) broke the old bulb the inside and loosened the reflective shield inside since it's attached to the top, inside the puddle lamp. 2) shook the old bulb pieces out and installed the new LED.
0 2011/04/01 13:13:57
2011 03 27 13.45.47
2011 03 27 13.45.47
0 2011/04/01 13:13:57