F150online Forums
difference from reg to scab
difference from reg to scab
0 2009/12/23 22:03:55
difference from reg to scab
difference from reg to scab
0 2009/12/23 22:03:55
brake light area, reg cab
brake light area, reg cab
0 2009/12/23 22:00:11
brake light area, supercab
brake light area, supercab
0 2009/12/23 22:00:11
difference from reg cab to supercab
difference from reg cab to supercab
0 2009/12/23 22:00:11
headliner pulled back
headliner pulled back
0 2009/12/23 21:40:45
Orange Blast
Orange Blast
0 2009/12/23 21:27:02
Autozone fasteners
Autozone fasteners
0 2009/12/23 21:27:02
3M Window Weld urethane windshield sealant
3M Window Weld urethane windshield sealant
0 2009/12/23 21:27:02
tools needed
tools needed
0 2009/12/23 21:27:02
where the seat has to "hook" on up top
where the seat has to "hook" on up top
0 2009/12/23 21:19:11
seat installed
seat installed
0 2009/12/23 21:19:11
the hook that attaches up top
the hook that attaches up top
0 2009/12/23 21:19:11
showing where the seat pushes into place down low
showing where the seat pushes into place down low
0 2009/12/23 21:19:11
pushing the weatherstrip back on
pushing the weatherstrip back on
0 2009/12/23 21:13:02
cab w/weatherstrip removed
cab w/weatherstrip removed
0 2009/12/23 21:13:02
cab w/weatherstrip back in place
cab w/weatherstrip back in place
0 2009/12/23 21:13:02
all bolts back in place.
all bolts back in place.
0 2009/12/23 21:13:02
putting the interior panel back in place
putting the interior panel back in place
0 2009/12/23 21:07:26
screwing the hanger back in
screwing the hanger back in
0 2009/12/23 21:07:26
putting interior panel back in place with new clip
putting interior panel back in place with new clip
0 2009/12/23 21:07:26
hanger
hanger
0 2009/12/23 21:07:26
bolting the seatbelts back in place.
bolting the seatbelts back in place.
0 2009/12/23 20:58:53
Bolt window and surround back to cab.
Bolt window and surround back to cab.
0 2009/12/23 20:58:53
Autozone clip in place.
Autozone clip in place.
0 2009/12/23 20:58:53
Went to autozone and got some replacement clips - they didn't have any that matched, so I had to make do with these.
Went to autozone and got some replacement clips - they didn't have any that matched, so I had to make do with these.
0 2009/12/23 20:58:53
applying sealant.
applying sealant.
0 2009/12/23 20:50:15
Cab with window and surround put in place but not bolted
Cab with window and surround put in place but not bolted
0 2009/12/23 20:50:15
cab with replacement surround installed (must do before installing window)
cab with replacement surround installed (must do before installing window)
0 2009/12/23 20:50:15
window with urethane applied
window with urethane applied
0 2009/12/23 20:50:15
Another track where the sealant needs to go.
Another track where the sealant needs to go.
0 2009/12/23 20:39:13
3M window-weld urethane windshield adhesive
3M window-weld urethane windshield adhesive
0 2009/12/23 20:39:13
Cab with everything removed (pre cleaning)
Cab with everything removed (pre cleaning)
0 2009/12/23 20:39:13
This shows the track where the seal needs to go.
This shows the track where the seal needs to go.
0 2009/12/23 20:39:13
cleaning the factory seal off the body
cleaning the factory seal off the body
0 2009/12/23 20:32:27
My dad used diesel to remove the old butyl seal. Worked great.
My dad used diesel to remove the old butyl seal. Worked great.
0 2009/12/23 20:32:27
This is what was left on the rear window from the factory seal. Needs to be cleaned/scraped off.
This is what was left on the rear window from the factory seal. Needs to be cleaned/scraped off.
0 2009/12/23 20:32:27
showing messiness left after removing the window. Also showing the screws you need to remove before taking the surround off.
showing messiness left after removing the window. Also showing the screws you need to remove before taking the surround off.
0 2009/12/23 20:32:27
peel back headliner slightly to get to bolts holding the window surround in
peel back headliner slightly to get to bolts holding the window surround in
0 2009/12/23 20:26:14
cut through the factory seal with a knife, putty, whatever you can find thats somewhat sharp
cut through the factory seal with a knife, putty, whatever you can find thats somewhat sharp
0 2009/12/23 20:26:14