F150online Forums
Flex A lite 270
Flex A lite 270
0 2008/07/26 11:59:46
E Fans 1
E Fans 1
0 2008/07/26 11:59:46
E Fans 2
E Fans 2
0 2008/07/26 11:59:46
Thought I had a gasket leak so I got some Stage 8 locking bolts. but during the install I found out the leak was @ the collector.. Oh well I least I know they won't leak now..
Thought I had a gasket leak so I got some Stage 8 locking bolts. but during the install I found out the leak was @ the collector.. Oh well I least I know they won't leak now..
3 2008/07/26 12:03:39
Stage 8
Stage 8
0 2008/07/26 12:03:39
IAT Its hard to see it but I had to move it to the upper plenum. I had to remove the S/C and drill and tap the hole.
IAT Its hard to see it but I had to move it to the upper plenum. I had to remove the S/C and drill and tap the hole.
0 2008/07/26 12:10:20
IAT 2
IAT 2
0 2008/07/26 12:10:20
TCI Trans pan. Adds a a little capacity. I had to remove the crossmeber to get it in. still not that much work.
TCI Trans pan. Adds a a little capacity. I had to remove the crossmeber to get it in. still not that much work.
2 2008/07/26 12:13:54
Trans pan 2
Trans pan 2
0 2008/07/26 12:13:54
T/A diff cover. Mostly for looks I'm not pushing that much HP but I think they look Good..I'm going to upgrade to Stainless hardwear.. the cap screws rust
T/A diff cover. Mostly for looks I'm not pushing that much HP but I think they look Good..I'm going to upgrade to Stainless hardwear.. the cap screws rust
0 2008/07/26 12:13:54
T/A cover 002
T/A cover 002
0 2008/07/26 12:18:58
T/A cover 003
T/A cover 003
0 2008/07/26 12:18:58
42LB Injectors. I'm using a Troyer tune so I upgradded to 42 Lb injectors and a 90mm MAF
42LB Injectors. I'm using a Troyer tune so I upgradded to 42 Lb injectors and a 90mm MAF
0 2008/07/26 12:21:44
90 MM MAF
90 MM MAF
0 2008/07/26 12:21:44
Outerwear filter cover
Outerwear filter cover
0 2008/07/26 12:24:30
Outerwear 2
Outerwear 2
0 2008/07/26 12:24:30
BBK 75mm Throttle Body
BBK 75mm Throttle Body
0 2009/06/09 08:50:47
Throttle Body Cover
Throttle Body Cover
0 2009/06/09 08:50:47
Troyer Decal
Troyer Decal
0 2009/06/09 08:50:47
Throttle body cover.. I made a place to mount the extra fuel gauge I had. sanded it down smooth, painted, cleared, wet sanded and hand polished....looks better in person
Throttle body cover.. I made a place to mount the extra fuel gauge I had. sanded it down smooth, painted, cleared, wet sanded and hand polished....looks better in person
0 2009/06/09 08:50:47
Throttle Body Cover
Throttle Body Cover
0 2009/06/09 09:30:50
blurry pic of T for oil gauge
blurry pic of T for oil gauge
0 2009/12/22 23:19:47
T installed the oem sensor is pointing to the whell well and the -4 line comes out towards the front of the motor
T installed the oem sensor is pointing to the whell well and the -4 line comes out towards the front of the motor
0 2009/12/22 23:19:47
OEM sensor to 1/4 T, a 1/4 close nipple, a 1/4 to 1/8 reducer to the 1/8 -4 fitting we found that we needed a 1/4 90 inbetween the sensor and the T
OEM sensor to 1/4 T, a 1/4 close nipple, a 1/4 to 1/8 reducer to the 1/8 -4 fitting we found that we needed a 1/4 90 inbetween the sensor and the T
0 2009/12/22 23:19:47