So Im looking at some 18x9s for the 99 Superduty. A little confused on offset. There are some with +10 or something like that and then some with 0!! I am thinking the 0 is what I want that should be 4.5" backspace. correct? I want them to stick out as much as possible.


Wandell???/ LOL


Thanks,
Shane

 

You can actually get away with a -6mm offset in an 18x9 as the backspacing will only be 4.84". An 18x9 with an offset of 0mm will give you roughly a 5" backspacing.

 

I'd suggest a 10 inch wide wheel with 4.5 inches of backspacing if you want a wide look.