Trail grapplers

Thread Tools
 
Search this Thread
 
Old Jan 31, 2012 | 10:28 AM
  #1  
Leirhiht's Avatar
Thread Starter
|
Member
Joined: Feb 2011
Posts: 41
Likes: 0
Trail grapplers

Ive got an 09 lariat with 20" wheels. Looking to add some KMC XD series addict wheels 20x9 wrapped with some trail grapplers either 295/55r20 or 295/60r20 with a front level kit from rough country. My question is....
Does anyone know if either of these tires will fit with out rubbing or having to cut any plastic?
If anyone has any pics of your ride with the same setup I'd like to see them.
I would also like to get an idea of how much the wheels and tires may poke out.

Thanks for reading
 
Reply
Old Jan 31, 2012 | 12:15 PM
  #2  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
What is the backspacing on the wheels and do you have a 4x4 or 4x2?
 
Reply
Old Jan 31, 2012 | 02:49 PM
  #3  
Leirhiht's Avatar
Thread Starter
|
Member
Joined: Feb 2011
Posts: 41
Likes: 0
Originally Posted by wandell
What is the backspacing on the wheels and do you have a 4x4 or 4x2?
The back spacing is 5.46 inches and the off set is +18mm, my truck is a 4x4
 
Reply
Old Jan 31, 2012 | 03:49 PM
  #4  
Barrett's Avatar
Technical Article Contributor
Joined: Oct 2007
Posts: 2,777
Likes: 0
From: San Antonio, Texas
Nice wheel choice
 
Reply
Old Feb 1, 2012 | 10:55 AM
  #5  
Leirhiht's Avatar
Thread Starter
|
Member
Joined: Feb 2011
Posts: 41
Likes: 0
Originally Posted by Barrett
Nice wheel choice
Ya I like them a lot. Looks good on your truck. What size tires are you rolling with? Are they Muds or All terrains?
 
Reply
Old Feb 1, 2012 | 12:34 PM
  #6  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
I'd go with the 295/55-20's unless you want to add a leveling kit also.
 
Reply
Old Feb 1, 2012 | 01:12 PM
  #7  
Leirhiht's Avatar
Thread Starter
|
Member
Joined: Feb 2011
Posts: 41
Likes: 0
Originally Posted by wandell
I'd go with the 295/55-20's unless you want to add a leveling kit also.
Whoops. Shouldve mentioned that I do have a rough country level kit. Think i could fit either size with out have to trim?
 
Reply

Trending Topics

Old Feb 1, 2012 | 03:34 PM
  #8  
Barrett's Avatar
Technical Article Contributor
Joined: Oct 2007
Posts: 2,777
Likes: 0
From: San Antonio, Texas
Originally Posted by Leirhiht
Ya I like them a lot. Looks good on your truck. What size tires are you rolling with? Are they Muds or All terrains?
Thanks man, I've got 35x12.5 18 Toyo M/Ts.
 
Reply
Old Feb 2, 2012 | 12:34 PM
  #9  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
I'd try to test fit the larger one.
 
Reply
Old Feb 3, 2012 | 01:18 AM
  #10  
01screw20's Avatar
Member
Joined: May 2010
Posts: 47
Likes: 0
From: Springfield, OR
I have the 295/55/20 Nitto Trail Graps and absolutely love them. No rubbing at all. I have the 2.5" rough country kit as well as the rear air suspension. Sits pretty nice in my opinion. I am not sure on the backspacing of my rims but i believe the offset is the same at +18. Here are a few pictures for looks purposes..





 
Reply
Old Feb 3, 2012 | 10:47 AM
  #11  
Leirhiht's Avatar
Thread Starter
|
Member
Joined: Feb 2011
Posts: 41
Likes: 0
Originally Posted by 01screw20
I have the 295/55/20 Nitto Trail Graps and absolutely love them. No rubbing at all. I have the 2.5" rough country kit as well as the rear air suspension. Sits pretty nice in my opinion. I am not sure on the backspacing of my rims but i believe the offset is the same at +18. Here are a few pictures for looks purposes..





Perfect thanks for the input and pics helped alot.
Truck looks bad *** too
 
Reply




All times are GMT -4. The time now is 06:11 PM.