Recently put a AS leveling kit on my truck 05 f150 fx4 sits level now. Anyways looking at buying a set of XD797 Spy Wheels 18.9 and buying a 33x12.5 tire (mud tire) dont know what brand yet. What I wanted to know if I would have any problems running this setup on my truck and is anybody else running these wheels? How wide are the factory wheels?



XD Series XD797 Spy Wheel
18x9, 6 on135 Bolt Pattern
Backspace 4.53 in.
Max Load = 2200lbs
Finish = Gloss Black Machined
Hubcentric = No
Offset = -12 mm

 

You will have no problems with that setup. If you decided to run a 35 you will probally run into rubbing issues. should look good. I think factory fx4 wheels are 8" wide. I am running the same bs/offset, rims will stick out about 2" futher than stock.

 

35's won't fit using those wheel with only a leveling kit. You will have to add more lift or go with 33's. Those wheels will stick out 2.5 inches wider than the stock 18x7.5 inch wheels (which have 5.5 inches of BS).

 

What size tire are you running? 33s? if so got any pictures?

 

I didnt plan on running anything larger than 33x12.50. Since these wheels will stick 2.5 out farther, do you think 33x12.50 on that wheel will rub at full lock? I know the mud tires (measures 31 inches tall) I got on the factory wheels are probably about 2 inches from rubbing the inner fender at full lock. Just dont want to pay almost 200 a wheel and not work with what Im looking to run.

Thanks

 

u should clear no problem. I just put 33x12.50 DC FC11 - 18 x 9 XD monsters +18 5.71 BS (which i know is not what your getting) but they were almost 2" wider than stock. I have no level. they stick out 1-1.5". pics in profile

good luck - those are nice wheels!