Torn between 2 different wheels....need input

Thread Tools
 
Search this Thread
 
  #1  
Old 04-12-2011, 10:16 AM
RamiusDC's Avatar
Member
Thread Starter
Join Date: Aug 2009
Location: Mississippi
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Torn between 2 different wheels....need input

I'm about to order either Ballistic Hostel's or Ballistic Wizards. 18x9 both in black. The wheels I have stick out too far and I don't like the look. I do like them to stick out some. The Hostel's come in +12 and -12 offset. The Wizard's come in a 0 offset. The wheels I have now are Cruiser Alloy 18x10 w/ -25 offset. Which will be for sale very soon if anyone wants them. I like both wheels equally so the offset is the deciding factor. Thanks guys.








 
  #2  
Old 04-12-2011, 10:17 AM
RamiusDC's Avatar
Member
Thread Starter
Join Date: Aug 2009
Location: Mississippi
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
The lift is a 6" pro comp stage 1.
 
  #3  
Old 04-13-2011, 07:52 AM
RamiusDC's Avatar
Member
Thread Starter
Join Date: Aug 2009
Location: Mississippi
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Could someone help me out
 
  #4  
Old 04-13-2011, 08:59 AM
fx4 for life 79's Avatar
Senior Member
Join Date: Jan 2008
Location: Katy, Tx
Posts: 2,806
Likes: 0
Received 1 Like on 1 Post
I would imagine either wheel will bring em in closer since they are not as wide but im no expert
 
  #5  
Old 04-13-2011, 12:42 PM
F_ast's Avatar
Senior Member
Join Date: Feb 2009
Location: Uxbridge, Ontario
Posts: 584
Likes: 0
Received 0 Likes on 0 Posts
a 10" wheel with a -25mm offset is the equivilant to a -40mm or so 9" wheel.

You will want to look at the knuckle on the lift to see what kind of room you have, but typical minimum req;s for lifts is a wheel with a -12mm offset on a 9" wheel.

Here is a pic of my 20x9 KMC Hoss with a -12mm offset with 305-55-20 (33x12x20) MT ATZ's

 
  #6  
Old 04-14-2011, 10:30 AM
fx4 for life 79's Avatar
Senior Member
Join Date: Jan 2008
Location: Katy, Tx
Posts: 2,806
Likes: 0
Received 1 Like on 1 Post
Originally Posted by F_ast
a 10" wheel with a -25mm offset is the equivilant to a -40mm or so 9" wheel.

You will want to look at the knuckle on the lift to see what kind of room you have, but typical minimum req;s for lifts is a wheel with a -12mm offset on a 9" wheel.

Here is a pic of my 20x9 KMC Hoss with a -12mm offset with 305-55-20 (33x12x20) MT ATZ's

You can look in my albums at my 05, I had 17x9 with 4.75 bs I believe
 



Quick Reply: Torn between 2 different wheels....need input



All times are GMT -4. The time now is 11:25 PM.