Anyone running 295/55/20 Nitto Trail Grapplers on a stock height 4x4? According to all of the calculaters they should be a 32.8/11.6/20, which should give me plenty of clearance. I don't want any rubbing at all with the new tires.

I have 305/55/20 Toyo AT currently on my 06 screw 4x4. After a lot of searching, I found the trail grapplers made a size I believe will not rub at all.

Input and/or pics would be appreciated.

 

Nitto tire list those tires as 32.91" x12.6" which will rub on your upper control arms at full lock. I have the exact tires waiting to go on my 20's. Im debating 1 1/2" spacer/adapters to help clear them

 

Any idea why Nitto would make two 33x12.5x20 tires? 295/55/20 and 305/55/20. Is it possible they listed the width incorrectly on their website since all of the conversion calculaters show the 11.6 width?

Pushnf8, Do you have the 295/55/20's or the 305/55/20's?

 

Right. The 295's should be about 1/2 inch narrower than the 305/55-20's.

 

Thanks, I actually found a close up picture of the sidewall of a 295/55/20 on a chevy forum thanks to google and hours of looking. The sidewall actually lists 33x12.5 next to the 295/55.

Back to the drawing board because I dont want to risk rubbing any more and I want an aggressive sidewall.