What PSI??

Old Nov 8, 2010 | 09:17 AM
  #1  
BigTerp's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2010
Posts: 303
Likes: 0
From: Maryland
What PSI??

I'm running Goodyear Wranglers LT275/65R18. Just curious on what would be the best psi to be running? I just evened out all four at 35psi over the weekend (Dealer had them set at 30 when I purchased) Tried searching the net to see what Goodyear reccomends, but could only find the max. My truck is my daily driver but winter is coming and I do take my truck offroad for hunting. Thanks for any help!!!
 
Reply
Old Nov 8, 2010 | 10:33 AM
  #2  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
If those are a LR C with a max of 50, you should be running them at about 40. I had that size on my 04 and the recommended pressure on the door for those was 40. Even 35 would be a bit low, while 30 is or is near unsafe.
 
Reply
Old Nov 9, 2010 | 09:15 AM
  #3  
BigTerp's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2010
Posts: 303
Likes: 0
From: Maryland
Originally Posted by kingfish51
If those are a LR C with a max of 50, you should be running them at about 40. I had that size on my 04 and the recommended pressure on the door for those was 40. Even 35 would be a bit low, while 30 is or is near unsafe.
Thanks man!! I checked my door sticker and 40 is what is recommended for my tires. I've used the door sticker to check for axle ratio and other things, but didn't realize tire information was on there as well. I'll be getting my wheels back up to 40 psi today. Thanks again!!
 
Reply
Old Nov 9, 2010 | 10:09 AM
  #4  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
You might also want to read this if you get different tires.

https://www.f150online.com/forums/wh...sures-too.html
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:59 PM.