Replacing MT Tires on DC1 Rims Need Help

Thread Tools
 
Search this Thread
 
Old Jul 15, 2010 | 04:20 PM
  #1  
manous's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2010
Posts: 1
Likes: 0
Replacing MT Tires on DC1 Rims Need Help

I'm throwing in the towel and replacing my 2 year old Mickey Thompson Tires. They are just too loud. The rims are **** Cepek DC-1 18x9.

Can anyone recommend what size tire with a slightly less aggressive tread I can use?

I would like to keep more or less the same width because I put the fender flares on and don't want it to look stupid.

Present size of the MT tires are 325 60 18

BF goodrich, goodyear? Again I would like to maintain the stance and use my truck for hauling atv's and snowmobiles

Thanks in advance
 
Reply
Old Jul 15, 2010 | 04:29 PM
  #2  
buckshot85's Avatar
Senior Member
Joined: Mar 2010
Posts: 387
Likes: 0
From: Hampton S.C.
look into the goodyear duratracs, Di** Cepek fun country II's, mickey thompson atz, procomp extreme at, these are all pretty aggressive at's.
good luck in finding some tires.
 
Reply
Old Jul 15, 2010 | 04:32 PM
  #3  
UNC Lariat's Avatar
Senior Member
Joined: May 2010
Posts: 370
Likes: 0
From: North Carolina
I had a set of BFG A/T (KO) on my old Blazer. I really liked them. You couldn't hear them on the road at highway speeds. I know they are nowhere nearly as aggressive as your MTs but they rode great, wore well, and looked pretty good too. They are available in 305/65/18. That's about 1/2 more narrow than what you're currently running but I wouldn't think it would be a very noticeable difference.
 

Last edited by UNC Lariat; Jul 15, 2010 at 11:11 PM.
Reply
Old Jul 15, 2010 | 10:54 PM
  #4  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
All of the above are great choices.
 
Reply




All times are GMT -4. The time now is 02:33 PM.