Just leveled and put 35's on my '10 Screw
Thread Starter
|
Member
Joined: Jun 2010
Posts: 19
Likes: 0
Just leveled and put 35's on my '10 Screw
New to the forum but utilized all the info i found here for what i've done so far.
I put the AutoSpring 2.5 inch front kit and the Ready Lift 1 1/2 rear block kit. 295/65/20 Nitto Trail Grappler M/T's. They measure at 35.4 x just under 11 1/2 wide. There is about half an inch between the sidewall lug and the upper control arm. There is very very minor rub at full lock.
100 % stock:
Front lift only:
Front and rear lift:
Final Pictures:
I put the AutoSpring 2.5 inch front kit and the Ready Lift 1 1/2 rear block kit. 295/65/20 Nitto Trail Grappler M/T's. They measure at 35.4 x just under 11 1/2 wide. There is about half an inch between the sidewall lug and the upper control arm. There is very very minor rub at full lock.
100 % stock:
Front lift only:
Front and rear lift:
Final Pictures:
Senior Member
Joined: Dec 2009
Posts: 318
Likes: 0
From: Northern Colorado
Trending Topics
Thread Starter
|
Member
Joined: Jun 2010
Posts: 19
Likes: 0
haha Thanks. I like the color too. I have a 65 mustang that I painted the same color a couple years back. Now I have a matching set! 
