Hey guys, before I order the wheels I have a couple questions.

On my '07 FX4 Screw I'm wanting to do a decent drop and throw on the Saleens w/ some 305/40/23's.

First what tires are you guys running. Secondly could I get buy w/ this size tires on all +30 offset? How bout +44 offset? (Rubbing after dropping is a main concern)

I'm familiar w/ making wheels sit flush and rolling fender lips as my 350Z was slammed and flush, however not sure if I could still squeeze a +30 in the front after a 2/4 drop or a 3/5 drop. Pics w/ specs of offsets and tires sizes would be appreciated.

Thanks guys (Oh and could you post what drops/brand you have).

 

werd/...

i got the same exact question,,, i got a 05 fx4 thou...

 

I would love for someone to answer this question....I keep coming back to it cause I have the same question.

 

Bump

 

look in my gallery. i have 30 offsets and a 2/5 eibach drop. no rubbing at all

 

no rubbing like mix has said

 

which would tuck more? 30 or 44

 

I beleive the offset is measured from the center of the wheel.. thus, the smaller measurement (30) would be closer to the axle. But then I looked up a definition of offset and really got confused.

So is that right? 30 tucks under truck more and 44 pops out a bit to allow for larger brakes, if so desired

 

the first part you wrote sounds right, then on the second part i would say 44 is tucked in more and 30 sticks out slightly more.

The more positive offset a wheel has , the more the center of the wheel is pushed out towards the front of the rims thus tucking it in more , if that makes sense.

 

the more offset (higher number), the more it tucks in.......more offset also = more backspacing. If I were you I'd go 44 offset in front.

 

thanks guys. I'd love to say that I understand completely, but no matter, I got the jest of it. 44 tucks in more, 30 will give a wider stance.

 

44mm is for the front.
30mm is for the rear.

 

i just got orders to Misawa, lapan. buy mine.. 30 MM all around

 

44mm is for the front.
30mm is for the rear.
__________________

yeah i know that is the way a standard set runs, but have seen some packages on e-bay in the same size. my preference is to keep them as tucked as possible..

 

How much do you want for your wheels and where do you live?