My front brakes are dragging. To the point that the rims are getting hot(not too hot) and the truck pulls slightly to the right. THe back brakes are fine. I already replaced the calipers, pads, rotors, fluid, and lubed the pins. The hoses i have on order, and im wondering about the adjustment rod for the brakes, if its out to far and not letting the front brakes release all the way.

If my front brakes are draggin but my rear ones are fine would adjusting the master cylinder rod help just the front, or would i only want to adjust that rod if they were all dragging? Thanks!

This is my first post and this place seems like a good place to get alot of information!