F150online Forums

Notices

Will they rub?

Thread Tools
 
Search this Thread
 
Old Dec 13, 2008 | 10:05 PM
Share
  #1  
Grayson101's Avatar
Thread Starter
|
Member
Joined: May 2008
Posts: 19
Likes: 0
From: Bakersfield, California
Question Will they rub?
I have a 2006 F150 4x4 and I am getting a 6 inch lift and getting 35/12.50's with 20x10 rims? my question is will they rub?
 
Reply
0
Old Dec 13, 2008 | 10:31 PM
Share
  #2  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
It will depend on the backspacing of the wheel. If it's 4.5 or 5 inches you will probably have to trim a little plastic.
 
Reply
0
Old Dec 13, 2008 | 10:44 PM
Share
  #3  
Grayson101's Avatar
Thread Starter
|
Member
Joined: May 2008
Posts: 19
Likes: 0
From: Bakersfield, California
Originally Posted by wandell
It will depend on the backspacing of the wheel. If it's 4.5 or 5 inches you will probably have to trim a little plastic.
Would I just have to trim a little bit off the front of the fender well you think?:o
 
Reply
0
Old Dec 14, 2008 | 09:11 AM
Share
  #4  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Probably the front valance and at the rear of the front wheelwell where the flares mount. And that is only if the wheel has a shallow backspacing.
 
Reply
0
Old Dec 14, 2008 | 03:39 PM
Share
  #5  
Grayson101's Avatar
Thread Starter
|
Member
Joined: May 2008
Posts: 19
Likes: 0
From: Bakersfield, California
Thanks wandell!!
 
Reply
0
Back to Subforum
Wheels, Tires & Brakes
View Next Unread
Looking for stock Lariat or fx4 rims for 08'




Advanced Search

All times are GMT -4. The time now is 03:27 PM.