Wheels

Thread Tools
 
Search this Thread
 
Old Aug 3, 2008 | 11:21 PM
  #31  
Jason9301's Avatar
Member
Joined: Apr 2008
Posts: 31
Likes: 0
Originally Posted by FX4Screwdude
Alright right now im looking at 305/55/20 Nitto TG's on XD Monsters.

If going with the 18" wheel, the only tire I like is the Toyo Mts. But not sure how they are gonna be for everyday use. Road noise/rain/etc. Fuel MPG, vs the Nittos AT. Wont be off-roading any.

So any way I was at Discount Tire today and the sales guy calls to see if he can get the monsters in a 20x9 because his computer didnt show that he could.

Whoever he talked to said yeah they were available and that I would need a +35 Offset. So sales guy precedes to tell me that the outside of the wheel will be inline with the trim around the wheel well on the outside of truck and that the rear will be staggered from the front.

Looking around the internet I found that the Monsters come in
-12mm
+18mm
+35mm
with backspacing
4.53
5.71
6.38
I dont know how accurate this is as it didnt come direct from KMC

Isnt the +35 gonna send the wheel right to the outside of the truck like
what I was trying to avoid. Seems like most people here have been doing the +18 and whats up with the staggered look that hes talking about?

Thanks
I personally have the chrome monsters18x9 with 5.71" bs and no rubbing with 325-60-18 nitto tera grapplers and it lokks great tires stick out bout 1" farther then truck but it mean looking if youy like that look
 
Reply
Old Aug 4, 2008 | 12:16 PM
  #32  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
The 305's are approximately 12.50 inch wide tires. There is gonna be a little difference from tire brand to brand. The combo you want is gonna sit almost identically to Hill2107's truck, except your tires will be about 2 inches shorter than his 35's. If your OEM tires are 275's, that means a 305 is gonna be 30mm wider. Therefor just the tire is gonna add 15mm of width.
 
Reply
Old Aug 10, 2008 | 11:54 PM
  #33  
noilestl's Avatar
Junior Member
Joined: Apr 2008
Posts: 3
Likes: 0
I have an 04 FX4. Right now I have 17x10 -25 offset w/ 4.5" BS with 33/12.50/17 and they stick out way past the fenders. I am looking at a 17x9 -12 offset w/ 4.5" BS and 285/70R17, are the new wheels and tires going to be even with the fenders or still stick out past the fenders?
 
Reply
Old Aug 11, 2008 | 12:38 PM
  #34  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
A 9 inch wide wheel with 4.5 inches of bs is only gonna tuck in an inch farther than your current 10 inch wide wheels because the bs is the same.
 
Reply




All times are GMT -4. The time now is 07:37 AM.