i tried puting on some eagle alloy series 102{i think they are the same as yours} on my 02 screw-i bought new lugs and locks for my 14mm studs, but they DID NOT fit. my uncle had them b/f me on a 98 scab- his lugs were 12x1.75 would i need 14x1.75? any help would help me greatly!! also ALL the parts stores round me DONT have these please help!!

 

What do you mean by wouldn't fit? Were the lugs too short to tighten down or were they too small to screw onto the studs?

 

the lugs were the right diameter for the studs but i think the threads on them were wrong-i think my truck has metric threaded studs and the lugs i purchased were standard threads-and they were too short for the lugs as well- went to a 4wheel drive shop after work 2day-they told me i needed 14mm x 2.0 threads, does this seem correct? anybody feel free to chime in

 

That sounds right. I bet you were just given the wrong lugs.

 

yes i was given the wrong lugs, I ordered a kit that has the right lugs,locks and it has valve stems. I also ordered new center caps as well-my uncle had these wheels b/f me and the caps looked like crap, they are differnt from yours though i ordered the push thru style. Wandell thanks for all your great help I really appreciate it!! I will post b/f and after pics hopfully by the weekend!!!!!!

 

new question-what is a gen 2 supercrew? Mine is an 02-does that mean i have a gen 1? and what makes it gen 1 or 2?

 

During 2001 Ford made several changes to the Screws during the model year. First they added head rests to the rear seats and then they added completely different seats front and rear. The late production, Gereration III models like mine are basically identical to the 2002 model Screws.

 

Ok cool so I have a GEN III screw like you do,did the lariats recive any changes during the 02 model year?

 

No. The Gen I, Gen II and Gen III refer to changes during the 2001 model year only.