Pics of 20's with 37's on a 6inch lift?
Thread Starter
|
Member
Joined: Jun 2007
Posts: 67
Likes: 0
From: San Benito, Texas
Pics of 20's with 37's on a 6inch lift?
Want to see how it looks. I should be able to do this if I get a basic fabtech and put my leveling kit on it right? Will I need to regear. Its a 4.6 4x4.
Senior Member
Joined: Dec 2006
Posts: 1,938
Likes: 1
From: El Paso
Since you want to get a basic Fabtech with a spacer check out this gallery he had that exact setup. Personally I wouldn't get the spacer in my opinion because of the wear on the cv's. He has a good view of the cv angles check it out.
https://www.f150online.com/galleries....cfm?gnum=7916
https://www.f150online.com/galleries....cfm?gnum=7916
Senior Member
Joined: Mar 2008
Posts: 524
Likes: 0
From: custer
the f150 looks BA!!! those are 20's? they dont look like it.
Senior Member
Joined: Jan 2007
Posts: 508
Likes: 1
From: California
Senior Member
Joined: Feb 2008
Posts: 425
Likes: 0
From: Colorado
There is a guy on the forum here with a blue extended cab with nitto mud grap 37's on 20" cruiser alloy 921c's. I think its the rize lift but its a beautiful truck. If I run across a pic I'll link back here if somebody hasn't done so already.
Found it, its klrdog's truck. Its a rize, but can get the same 8" out of a 6" kit plus a spacer
Found it, its klrdog's truck. Its a rize, but can get the same 8" out of a 6" kit plus a spacer
Last edited by duece212; Apr 11, 2008 at 06:20 PM.
