Rim Width

Thread Tools
 
Search this Thread
 
Old Jan 14, 2008 | 05:09 AM
  #1  
USMCF150's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2008
Posts: 4
Likes: 0
Rim Width

I have a 2000 F150 Man 2WD Supercab and have been looking at getting some rims for it. I am having a 3" bodylift put on this week as well as a 1 1/2" leveling kit. I found a great deal on some rims and they have the 5 x 135 bolt pattern but are 10" wide will these fit on my truck and if so how will it look?
 

Last edited by USMCF150; Jan 14, 2008 at 05:16 AM.
Reply
Old Jan 14, 2008 | 11:19 AM
  #2  
hawg_man's Avatar
Senior Member
Joined: Feb 2006
Posts: 1,402
Likes: 1
From: Arkansas
yeah they should. I would assume the backspacing around 4.5''. What diameter are they? Should be able to fit a 33x11.50 or 33x12.50 with a little trimming to fit them.

Welcome to the Site!
 
Reply
Old Jan 14, 2008 | 12:17 PM
  #3  
USMCF150's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2008
Posts: 4
Likes: 0
They are 16" by 10"
 
Reply
Old Jan 14, 2008 | 12:26 PM
  #4  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Yes, you will be fine.
 
Reply
Old Jan 14, 2008 | 01:01 PM
  #5  
sog805's Avatar
Member
Joined: Feb 2004
Posts: 38
Likes: 0
From: Ventura, CA ---> STL, MO
They are gonna stick outside of the fender quite a bit but they should fit fine.
 
Reply
Old Jan 14, 2008 | 08:06 PM
  #6  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
THey should be just about even with the edge of the fender flares (if you have flares). I have pics in my gallary.
 
Reply




All times are GMT -4. The time now is 12:21 PM.