Which tires on OEM 20's? thanks!

Thread Tools
 
Search this Thread
 
Old Nov 16, 2007 | 09:51 PM
  #1  
hog tied's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 36
Likes: 0
Which tires on OEM 20's? thanks!

I picked up a set of King Ranch 20's nearly new on craigslist for $250, man I'm pumped. Now I am confused on what to put on em! I installed the 2.5 as level on the front, 3" blocks on the back. I like a big agressive tire, but dont want a lot of noise or rubbing either. What should I do?

I was thinking about Toyo Open Country A/Ts 325/60/20. How do they fit,ride wear?


http://shop.itiresource.swiftsite.co...uctid=32560R20

Thanks, guys, I really appreciate it.
 

Last edited by hog tied; Nov 17, 2007 at 12:04 AM.
Reply
Old Nov 17, 2007 | 12:15 AM
  #2  
STONED150's Avatar
Senior Member
Joined: Nov 2007
Posts: 218
Likes: 0
From: DALLAS, TX
I had 35x12.5x20 toyo m/ts, and current have 325/60/20 toyo a/ts with a daystar 2.5 level lift. Mine does have minor rubbing when doing full lock u-turns(on the upper control arm). Hopes that helps.
 
Reply
Old Nov 17, 2007 | 08:57 AM
  #3  
raptor2's Avatar
Senior Member
Joined: Jun 2007
Posts: 198
Likes: 0
I have 305/55/20's on the OEM rims, they rub at full lock, its minor though. If you go 325/60/20 you WILL without question rub.
 
Reply
Old Nov 17, 2007 | 10:30 AM
  #4  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Yeah, they will fit but you will have some minor rubbing on the control arms at full steering lock.
 
Reply
Old Nov 17, 2007 | 11:16 AM
  #5  
07screw's Avatar
Senior Member
Joined: Jun 2007
Posts: 323
Likes: 0
From: jacksonville florida
Originally Posted by raptor2
I have 305/55/20's on the OEM rims, they rub at full lock, its minor though. If you go 325/60/20 you WILL without question rub.
they will both rub if you want a good look with out any rubbing issues
go with a 285 65 20
 
Reply
Old Nov 17, 2007 | 11:42 AM
  #6  
hog tied's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 36
Likes: 0
Originally Posted by 07screw
they will both rub if you want a good look with out any rubbing issues
go with a 285 65 20
Thanks, 07. I appreciate the pics, too.
 
Reply
Old Nov 17, 2007 | 12:01 PM
  #7  
07screw's Avatar
Senior Member
Joined: Jun 2007
Posts: 323
Likes: 0
From: jacksonville florida
no problem i just put a link for a tread for you on your other post one more 20 inch whining question ???
read that i wish i would have done more searching before i went so big and spent 1900.00
 
Reply




All times are GMT -4. The time now is 06:28 AM.