i just fell in love with the diamo 17k rims in black they are 18 x 10 with 5" backspacing i have an 05 f150 4x4 with 2.5" leveling kit how bad will these rub with 325/60/18 is there anything that could be done to make them fit better besides a lift kit

 

You'll probably have to do a little trimming because of the width and backspacing.

 

how much do you think i will need to trim will i be able to turn the wheels to full lock

 

anyone?

 

You probably won't have to trim a whole lot, but you would be better off with a 9 inch wide wheel, or a 10 inch wide wheel with 6 inches of backspacing.

 

Yes, but they should look great when you get it all done

 

You may have to trim a little on the lower inner fender flare. I did, pics in gallery.