PSI on 35/12.50/20 Nitto Mud grappler?

Thread Tools
 
Search this Thread
 
Old Jun 12, 2007 | 12:22 AM
  #1  
BestNTx's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2006
Posts: 1,166
Likes: 0
From: Fort Worth, TX
PSI on 35/12.50/20 Nitto Mud grappler?

I've got these tires and I'm wondering what PSI I should run them at to get a smooth ride, long tread life, and good gas mileage? If I can't have all I would like to have a smooth ride the most.
 
Reply
Old Jun 12, 2007 | 12:31 AM
  #2  
lastorms's Avatar
Senior Member
Joined: Feb 2007
Posts: 132
Likes: 0
From: Louisanna
You might have to play around with the air alittle to see what you like best. 40psi is usally pretty good. Could do the water print test (wet your tire and roll to see if you have too much air, center of tread will be visable and fades to the sides. Too little air sides will be visable and fade towards center) Try to get it as flat as possible for best wear. Less air means softer ride
 
Reply
Old Jun 12, 2007 | 07:29 AM
  #3  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
Those are a LR E tire. If the max psi is 65, us 45. If the max is 80, use 50.
 
Reply
Old Jun 12, 2007 | 12:40 PM
  #4  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
I'd try 40 psi.
 
Reply




All times are GMT -4. The time now is 07:51 AM.