anybody have any pictures with moto metals. also what tires do u recommend witha lifted truck with a lift kit.

 

Here you go. I only have a leveled truck. Wheels are 20x9 and tires are BFG All Terrain 285/55-20



More pictures in gallery.

 

 

I have a question if i go with moto 951 what is the differences from a 4.79 backspacing and a 5.18 backspacing?

 

the wheel will stick out roughly 3/10 of an inch further.

 

check out my sig!

 

which one will stick out 3/10 of an inch further the 4.79 backspacing or the 5.18 backspacing??

 

Only about 90% of the trucks with aftermarket wheels on the site.

I have Pro Comp Xtreme AT's on my truck and love them. They're an aggressive looking tire, yet very quiet on the road. Can't say much about the mileage factor because I've only had them about 2k miles, but they're rated at 40k miles.

 

The lower the backspacing number, the more it will stick out of the fender. 5.18" is close to the stock rim's backspacing of 5.5"
It will actually stick out 1.3 inches farther due to the additional rim width over stock.

 

so, I can buy a wheel with something in between 5.5 and 6.5max or backspacing??

 

I dont think Moto Metal gives you a choice with backspacing, do they? I think it is what it is.....

 

Yes, several Moto Metal wheels are available with 2 different backspacings.

 

Well no, because your stock rim is 7 inches wide...at least I think...

So if you go from a rim that is 7 inches wide with 5.5" backspacing to a rim that is 8" wide with 5.5" backspacing, it will stick out another inch. Backspacing is from the inner lip of the wheel to where the wheel contacts the hub.