question about moto metal 951

Reply Subscribe

Thread Tools

Search this Thread

May 8, 2007 | 08:14 PM

oracleaz808

Thread Starter

Junior Member

Joined: Oct 2006

Posts: 3

Likes: 0

question about moto metal 951

hey guys I am getting some 20 x 10 MM 951,s and was wanting to know how may inches is the lip on the version that stick out the most .

Thanks

May 8, 2007 | 08:50 PM

wandell

Senior Member

Joined: Sep 2001

Posts: 28,203

Likes: 2

From: cairo,ga

A lot of members here have the 951's. I'd also like to see a pic showing the lip of the two different backspacing whether they are 18's or 20's.

May 8, 2007 | 10:47 PM

mt_b8

Senior Member

Joined: Mar 2007

Posts: 307

Likes: 0

From: Galveston, Texas

I'm only aware of one make of the 20x10 mm951 for the F150, that is a +18mm offset and 4 3/4" backspace. That would give you around a 3" lip.

May 9, 2007 | 11:13 AM

roloplex

Senior Member

Joined: Nov 2006

Posts: 201

Likes: 0

From: Ashburn, VA

I just measured. Back Spacing = 4.53in.; Offset = -12mm the lip is 3in from the spoke and 4in from the back of the rim

May 9, 2007 | 12:09 PM

wandell

Senior Member

Joined: Sep 2001

Posts: 28,203

Likes: 2

From: cairo,ga

MT b8, do you have any pics showing the lip of your wheels?

May 9, 2007 | 12:13 PM

mt_b8

Senior Member

Joined: Mar 2007

Posts: 307

Likes: 0

From: Galveston, Texas

I will post some as soon as I get a chance.

May 9, 2007 | 09:15 PM

mt_b8

Senior Member

Joined: Mar 2007

Posts: 307

Likes: 0

From: Galveston, Texas

They need a bath, but here ya go. 20x9 +30mm offset, close to 6" of backspace. The lip is around 1.5" deep.

question about moto metal 951

question about moto metal 951

Trending Topics