Just trying to get an idea how far out 20x10s would stick out compared to 20x9s. thanks.

 

What' up dude, I have 20x10's on my 4x2 fx2 sport with 305 50 20's Nitto Terra Grapplers. See my Gallery. They stick out just right I'd say about 1/2 inch. It gives it a tough look.

 

It will depend on the backspacing of the wheels.

 

and the rims are MONDERA BLACK HAWKS

 

What do you mean depends on the backspacing?? Sry im new to all of this stuff but i heard the rims are offset so they would stick out some but i dont want them to stick out like more than an inch or so but what would be a good backspacing for that to happen??

 

Backspacing and offset are just measurements. Backspacing is the distance from the mounting surface of the wheel (where it bolts to the hub) to the rear edge of the wheel. The OEM 17 and 18 inch wheels are 7.5 inches wide and have 5.5 inches of backspacing. I'd try to stay with close to 6 inches of backspacing on a 10 inch wide wheel and between 5 and 6 inches on a 9 inch wide wheel.

 

18X10 mickey thompson classic II in my gallery.

 

Well im probable going to get the 20x10 951s on a 305-55-20 terra grappler a/t. So what backspacing would that give me.

 

I believe those are available with two different backspacing, 4.5 and 6 inches. (I know some sizes are anyway) A 10 inch wide wheel wiht 4.5 inches of backspacing will stick out 3.5 inches farther than the OEM 17 and 18 inch wheels. A 10 inch wide wheel with 6 inches of backspacing will stick out 2 inches farther than the OEM wheels. Also, the 18x10 inch wheels NorthCoast has have 6 inches of backspacing.

 

Be very sure that is the look you are going for before you buy wheels and have the tires mounted. Those are going to stick out far, I think too far with just a leveling kit.

 

K yeah thanks for the info, n i know i dont want them stickin out to far looking weird. But do you think you have any pictures of this so i could see a difference. thanks