I"m going to replace the front brake pads and rotors on my '01 F150 next week sometime. Is there anything else I would need besides the rotors and pads, any bearings or grease shields etc... I've got around 82K on the truck and do pull a travel trailer a few times a year... Do yall replace any of the washers, cotter pins etc...
I was planning on going back with oem or equilivent stuff...


Thanks, Kevin

 

2wd or a 4wd ? If a 2wd yes replace the bearings and cotter pins, if a 4wd the rotors are pressed on to the front spindels and I have no clue on how to get them off, good luck.

 

Thanks Cyclone, it's a 2wd...

Kevin

 

I don't think they are pressed on. To the best of my memory, they are just like my Nav on the 4x4 and are floating rotors