I HAVE A 2003 F150 4X4. I JUST ORDERED A 3" BODY LIFT FOR IT AND WAS WONDERING ABOUT TIRES AND WHEELS THAT WOULD FIT. ANY INFO WOULD BE GREAT. THANKS

Not sure about wheel offset or width, but I'd go with a 17" rim and 315/70/17 (35") tire.

Thanks For The Help.are You Sure That 35" Wont Rub?

Hopefully our in-house wheel and tire expert Wandell will chime in. I know he has a 01-03 Screw with a 3" body lift and 35's and it looks damn good. Most all trucks with that size lift run 35's. Heck, there's even a member on here that runs 35's on his stock height Screw. I know he has some rubbing, but I don't think you'd have any issues with 35's and a body lift.

You can run a 35x12.50 on a 10 inch wide wheel (4 1/2 inches of backspacing) with a 3 inch body lift if you also crank up the torsion bars and trim a little plastic off the front bumper's lower valance. I personally have 33's with a 3 inch body lift.

How hard is it to crank the torsion bars?

Its easy. Tighten two bolts, measure, re-adjust as necessary, repeat until you are where you want. Drive around the block, remeasure and re-adjust if necessary. Go get an alignment when you're done. Thats it.

THANKS GUYS FOR ALL YOUR HELP.