Show Off Your Rims and Tires
Senior Member
Joined: Feb 2008
Posts: 425
Likes: 0
From: Colorado
Originally Posted by Blue150
I am a powder coater and unless they really screw them up, you will not be dissappointed. Don't go any way but ultra high gloss. The mattes and semis tend to come out yellow due to low baking temps. If the PC'er lays a decent coat on them they should come out looking like glass. Your correct on the durability, however, they may chip later on in life. Metal that is going to be powdered needs to be somewhat rough, since your wheels are polished, the powder will eventaully chip upon impact. It will last longer than paint though.
https://www.f150online.com/forums/sh...d.php?t=324803
Junior Member
Joined: Apr 2008
Posts: 6
Likes: 0
From: Indiana
nice
Originally Posted by lowphat53
Hey all, I am not really new here, just never posted before. Attached is my 04 f-150 with 22's on it. Let me know what you think of my KMC/HOT WHEELS...
Thanks
Thanks
Junior Member
Joined: Apr 2008
Posts: 6
Likes: 0
From: Indiana
Im feeling that truck
[QUOTE=pushnw8]24" Edge Engineering Gauges on 295/35/24 Coopers. Custom KingRanch Center Pieces[/QUOTE
Nice Truck, Im feeling it. I have a few questions regarding the 24's fitting. Plaese hit me back at airforceones77@yahoo.com
Nice Truck, Im feeling it. I have a few questions regarding the 24's fitting. Plaese hit me back at airforceones77@yahoo.com
[/IMG]
