im sorry to ask this question again but i really dont have the time to look for the answer i have a 2 year old and a one month old , im running around like a fool. Can i fit 295/75/16 on a 16/9 rim. its for a 2002 f 150 supercrew fx4. i was going to go with the nitto grappler at. anyone with these and any imput on them.

thanks any help would be great.

 

Yes. You will probably have to crank up the torsion bars and trim a little plastic off the front bumper's lower valance.

 

i meant to say 285/75/16 on 16-9

 

Yes. I fit 285's on my Screw at stock height. They were not even close to touching anything when I had them on the stock 16x7's. When I mounted them on 16x10's (4 1/2 inches of backspacing) they touched the lower corner of the front bumper's lower plastic valance. I had to trim about 1/2 inch of plastic off for clearance.

 

Does the same apply for a '04 model?

 

No. The 04-05's are a completely different truck.