I've got a 2001 4x4 SCREW and am looking at purchasing 305/70/R16 NTG on 16x10 in. wheels. Does anybody have pics of this or similar on their truck? and how much trimming is needed to fit these tires? Thanks.

 

I have 285/75-16 (33x11.50) BFG AT KO's on 16x10 Eagle Alloys with 4 1/2 inches of backspacing on my Screw. I had to trim about 1/2 inch of plastic off my valance when my truck was at stock height. Since the 305/70's are the same height, but an inch taller, you should have to trim about 3/4 or 1 inch of plastic. Here's some pics.


https://www.f150online.com/galleries...-889-38346.jpg


https://www.f150online.com/galleries...2888-38348.jpg


https://www.f150online.com/galleries...2888-38349.jpg

 

SWAMPR

Here u go 16x10 AR Atlas with the Nittos 305/70/16

https://www.f150online.com/galleries...7827&anum=3825

 

Those Nitto's look great. How much did they cost you and did you get a package deal on the 16x10's?

 

No they were not a package deal but I paid about $1200 (Rims & Tires) from National Discount Tire. I could have a little cheaper on the net but Discount tire already replace one of my tire with no charge when I picked up a big screw on the side of the tire.

 

Hey SmokeyFX4,

Did you have to lift the truck or trim on the front valance to fit the 33" Nittos on there?

Has anyone tried shimming the bumper out instead of trimming?

Thanks for the info

LakeNut

 

No lift just trim the front lower valance