96 4x4 frt rotor replacement ?
Thread Starter
|
Junior Member
Joined: May 2000
Posts: 5
Likes: 0
From: Cincy,Ohio U.S.A.
96 4x4 frt rotor replacement ?
Noticed the other day my brakes were making noises so I pulled the wheels off & the rotor on the left is SHOT !! Am I going to need a special tool to get the front rotor off my 4x4 ??
1996 4x4 w/automatic hubs
Thanks in advance,
Scooter
------------------
1996 4x4 w/automatic hubs
Thanks in advance,
Scooter
------------------
Member
Joined: Sep 2000
Posts: 70
Likes: 0
From: Reseda, CA, USA
Hi, Scooter...
Just went through this. The rotors on these are actually a hub/rotor assembly. Removing them would be a b**ch, so I took mine in. I tried to find a shop that would do them on the truck, but no go. I ended up at Schlep Boys and paid almost $300, which, for me also included a new wheel bearing and some seals and o-rings. Got the bad rotor turned, and now I'm a happy camper!!!
------------------
Tom Kenney
tomk@bearcomp.com
tom@fluxtech.com
My truck, Sparky, is a 1992 F-150 XLT, 4x4 SC ShortBed, 302 EFI, E4OD, 3.55 LS, silver-on-black two-tone
MODS: K&N filter, Rancho steering damper
WISH LIST: 4.10 gears, shell, GT40P engine
Just went through this. The rotors on these are actually a hub/rotor assembly. Removing them would be a b**ch, so I took mine in. I tried to find a shop that would do them on the truck, but no go. I ended up at Schlep Boys and paid almost $300, which, for me also included a new wheel bearing and some seals and o-rings. Got the bad rotor turned, and now I'm a happy camper!!!
------------------
Tom Kenney
tomk@bearcomp.com
tom@fluxtech.com
My truck, Sparky, is a 1992 F-150 XLT, 4x4 SC ShortBed, 302 EFI, E4OD, 3.55 LS, silver-on-black two-tone
MODS: K&N filter, Rancho steering damper
WISH LIST: 4.10 gears, shell, GT40P engine
