MAF and Injectors Upgrading Question

Thread Tools
 
Search this Thread
 
Old May 28, 2001 | 04:21 PM
  #1  
LaunchinLiteLariat's Avatar
Thread Starter
|
Member
Joined: Oct 2000
Posts: 43
Likes: 0
From: Houston, TX
Question MAF and Injectors Upgrading Question

As I have just put in a 4.10LS and need to get my chip re-flashed, I want to go ahead and get a little more H.P. in it as well and get the re-flash for more than one thing. It is my understanding that a good MAF sensor AND injectors set-up (up to 24#) would help the H.P. level. What would be an apprx. H.P. gain and cost?

------------------
99' 2WD F-150,5.4,Deep Wedgewood Blue
Reg. Cab., Stepside LARIAT
Aftermarket Adds:
Snug-Lid Tonneau
K&N FIPK
Superchipped
Dynomax Cat-Back
Bilsteins HD Shocks
Trans-Cooler
4.10LS

Next:

Hellwig rear sway-bar and poly bushings on front sway-bar

[This message has been edited by LaunchinLiteLariat (edited 05-28-2001).]
 
Reply
Old May 29, 2001 | 10:48 AM
  #2  
LaunchinLiteLariat's Avatar
Thread Starter
|
Member
Joined: Oct 2000
Posts: 43
Likes: 0
From: Houston, TX
Unhappy

Nevermind...It looks like that would be a bad decision considering what I've seen in posts since I searched a little more. On the same track, I might as well look at a Ram-Air set-up for +/- the same money AND it will work nicely into any future mod upgrading.

Time to send the SCHIP to SCHOOL!
 
Reply




All times are GMT -4. The time now is 05:38 PM.