Resetting Check engine light
Thread Starter
|
Junior Member
Joined: Aug 2002
Posts: 3
Likes: 0
From: tx
Resetting Check engine light
On a F150 Supercrew - how do you reset the "check engine" light?
Per Autozone (They "ran" a diagnostic), I had a "Fuel Flow Restriction Malfunction" and would have to take it to the dealer. Before I did that I replaced the fuel filter and ran a bottle of Berryman's Fuel injector cleaner through. The hesitation I was experiencing seems to have gone away - wanted to clear the light and see if it had.
Per Autozone (They "ran" a diagnostic), I had a "Fuel Flow Restriction Malfunction" and would have to take it to the dealer. Before I did that I replaced the fuel filter and ran a bottle of Berryman's Fuel injector cleaner through. The hesitation I was experiencing seems to have gone away - wanted to clear the light and see if it had.
Last edited by bohicadan; Aug 5, 2002 at 05:02 PM.
Senior Member
Joined: Sep 2000
Posts: 1,704
Likes: 0
From: Mpls, MN
You can use an OBD-II scanner or remove the negative battery lead. If you disconnect the battery, leave it off for about 15 minutes to help insure the computer loses all memory of this little incident.
Last edited by AjRagno; Aug 5, 2002 at 04:06 PM.
Senior Member
Joined: Sep 2000
Posts: 1,704
Likes: 0
From: Mpls, MN
Originally posted by SSCULLY
Might be a silly question, but do you know what caused it ?
Might be a silly question, but do you know what caused it ?
https://www.f150online.com/forums/sh...409#post658409
Thread Starter
|
Junior Member
Joined: Aug 2002
Posts: 3
Likes: 0
From: tx
Per autozone, I had a "Fuel Flow Restriction Malfunction" and would have to take it to the dealer. Before I did that I replaced the fuel filter and ran a bottle of Berryman's Fuel injector cleaner through. The hesitation I was experiencing seems to have gone away - wanted to clear the light and see if it had.