how much do these mods cost?
Thread Starter
|
Member
Joined: May 2002
Posts: 56
Likes: 0
how much do these mods cost?
How much would it cost me for each of these mods:
Edelbrock performer cylinder heads
Trick flow stage 1 roller cam
K&N Filter
Double roller timing set
ARP oil pump drive shaft for security
Ive got advice on this forum to get these mods and was told that my 94 f150 xlt 5.8 would have more than 400 horspower after these mods. I just would like to know how expensive it would be.
Edelbrock performer cylinder heads
Trick flow stage 1 roller cam
K&N Filter
Double roller timing set
ARP oil pump drive shaft for security
Ive got advice on this forum to get these mods and was told that my 94 f150 xlt 5.8 would have more than 400 horspower after these mods. I just would like to know how expensive it would be.
Senior Member
Joined: Nov 1999
Posts: 139
Likes: 0
From: Conway, AR
Here's a link to the Edelbrock section of summitracing's webpage.
http://store.summitracing.com/landing_index.asp?v=EDL
That should give you some idea of cost. You're probably looking at over $1500 for those parts and the other things you'll need to install them(head gaskets, etc..) The heads alone are $539.50 apiece.
http://store.summitracing.com/landing_index.asp?v=EDL
That should give you some idea of cost. You're probably looking at over $1500 for those parts and the other things you'll need to install them(head gaskets, etc..) The heads alone are $539.50 apiece.