What would you do?
Thread Starter
|
Member
Joined: Nov 2001
Posts: 20
Likes: 0
From: Texas
What would you do?
Just finished doing the first mods on my 2001 Supercrew and I'm on a mission. Now it's time to do some more. I hope Mike Troyer get's involved in this. Give me some ideas of what you guys would do next? No lift! 33's will fit when I run the tread off of the stock rubber. What would you do? And uh, Mike; the chip is next!
Here's what's been done...
Did the home-made airbox mod and it looks/works great! I'll post a pic soon. I took my time and it came out perfect. Sound is a little milder than my old 98 F150 w/ a K&N FIPK, no real "WooOOmf!". But, I never really noticed that much "seat O' the pants" improvement from the $200 aftermarket toy anyway. And it was free if you don't count the three 25 cent dremel blades it cost me. It's got to breath better than w/ the stock . Probably change over to a Mac or Air Force when I get done with the rest of my wish list.
Cranked the torsion bars up to 1" lift and leveled out. Thanks to all the wrench turners here @ F150online for the instructions. Holy S*&#$t what a difference in the whole look. If you haven't done it and you have a 4X4? Get a 18mm wrench and start turnin'! You'll be happy. Ride has barely changed. I can't get over how much better it looks! I can't get over how much better it looks! Did I say that twice? Oh well, I can't get over how much better it looks...
Westin chrome down the sides.
Front end hitch for a winch.
Just had a Magnaflow 18" 1 into 2 out the back. Sounds perfect to me. Not loud. Good truck muff. No loss of torque either.
What do ya'll think I sould do next. Other than a chip. It's a given.
TS
Here's what's been done...
Did the home-made airbox mod and it looks/works great! I'll post a pic soon. I took my time and it came out perfect. Sound is a little milder than my old 98 F150 w/ a K&N FIPK, no real "WooOOmf!". But, I never really noticed that much "seat O' the pants" improvement from the $200 aftermarket toy anyway. And it was free if you don't count the three 25 cent dremel blades it cost me. It's got to breath better than w/ the stock . Probably change over to a Mac or Air Force when I get done with the rest of my wish list.
Cranked the torsion bars up to 1" lift and leveled out. Thanks to all the wrench turners here @ F150online for the instructions. Holy S*&#$t what a difference in the whole look. If you haven't done it and you have a 4X4? Get a 18mm wrench and start turnin'! You'll be happy. Ride has barely changed. I can't get over how much better it looks! I can't get over how much better it looks! Did I say that twice? Oh well, I can't get over how much better it looks...
Westin chrome down the sides.
Front end hitch for a winch.
Just had a Magnaflow 18" 1 into 2 out the back. Sounds perfect to me. Not loud. Good truck muff. No loss of torque either.
What do ya'll think I sould do next. Other than a chip. It's a given.
TS