Hey everybody. New to the forum. I have tried to search but haven't had luck on what I need. I have a 2005 f150 xl with the Romeo 4.6. Motor spun some rod bearings and I found a super cheap low miles Romeo out of a explorer, so I decided to just do the swap. I've changed out alot of items that needed to be swapped. I've come to a snag and need some help, the explorer motor has 2 knock sensors wired into 1 plug. My motor has 1 knock sensor. The plugs are different. The explorer knock sensors are on each side of the valley and my motors knock sensor is in the center of the valley. Do I put mine in one side or the other and let it be or wire the two together and put my plug on it? I'm sorry for the long post. Hopefully someone can make sense of what I'm trying to explain. Thanks everyone.