On my way to pick n pull Oem engine oil cooler 97-03

Thread Tools
 
Search this Thread
 
Old Nov 10, 2013 | 10:02 AM
  #1  
nonwoven29's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2008
Posts: 761
Likes: 1
From: Carson city Nevada
On my way to pick n pull Oem engine oil cooler 97-03

I'm going to pick n pull near me in a few hours. I wanted to pick up an Oem engine oil cooler. I thought I saw one on a 1999-02 expedition or a pick up while I was out there a few weeks ago. Stuck out to me because it had a oil filter relocation right at the bumper?

What SUVs & pick ups have a cooler that's plug and play so to speak?

5.4 2!valve engine 2001 expedition 4x4


Thanks guys
 
Reply
Old Nov 10, 2013 | 03:04 PM
  #2  
Galaxy's Avatar
Senior Member
Joined: Jun 2002
Posts: 4,293
Likes: 6
None of them have an oil cooler. Absolutely ZERO need for an oil cooler on this motor. What you most likely saw was one of the model years that came factory with a remote oil filter; but it was just a remote filter, no ensuing cooler.
 
Reply
Old Nov 10, 2013 | 04:51 PM
  #3  
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Originally Posted by nonwoven29
I'm going to pick n pull near me in a few hours. I wanted to pick up an Oem engine oil cooler. I thought I saw one on a 1999-02 expedition or a pick up while I was out there a few weeks ago. Stuck out to me because it had a oil filter relocation right at the bumper?

What SUVs & pick ups have a cooler that's plug and play so to speak?

5.4 2!valve engine 2001 expedition 4x4


Thanks guys
Only the 97-98 F150's had the remote system factory. Personally, I've never seen one on an Expy or anything else. Not stock anyway.

But it'll bolt right up to your engine, - so grab everything you can.

BTW, the cooler is on the block. I think you know that, but yea, 97/98 for the right one, -

 

Last edited by jbrew; Nov 10, 2013 at 04:57 PM. Reason: Cooler Info.
Reply
Old Nov 10, 2013 | 05:09 PM
  #4  
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
If the hoses are know good or marginal, it might be better to get some made up at a an auto supply that does that in the back room. Allot of them do and only takes about 5 minutes to make one, - Hydro hose with crimped fittings.

Keep in mind, you'll need old hoses for reference or it may be a PITA lol. - Depending where you go.
 
Reply
Old Nov 11, 2013 | 08:45 PM
  #5  
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Well, thanks for telling us anyway lol.
 
Reply




All times are GMT -4. The time now is 09:34 AM.