Code P0351, P0352, P0353 help

Thread Tools
 
Search this Thread
 
Old Nov 3, 2012 | 08:26 PM
  #1  
jcenter's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2012
Posts: 4
Likes: 0
From: Kodiak, Alaska
Code P0351, P0352, P0353 help

Good Evening All,
I got back from a Bering Sea Patrol and my 1998 F-150 would not start! So I changed the Plugs, Wires, and Battery. Well it starts but is missing! running really rough on idle and acceleration. I read the codes and twice got P0351,P0352,P0353. looked them up and they look to be a code for the COP option. the truck does not have COP.
Please help.
 
Reply
Old Nov 3, 2012 | 08:54 PM
  #2  
glc's Avatar
glc
Senior Member
15 Year Member
Veteran: Navy
Veteran: Reserves
Joined: Dec 2006
Posts: 43,545
Likes: 819
From: Joplin MO
Which engine do you have?
 
Reply
Old Nov 3, 2012 | 09:25 PM
  #3  
jcenter's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2012
Posts: 4
Likes: 0
From: Kodiak, Alaska
It has the 4.6 Triton V8.
 
Reply
Old Nov 3, 2012 | 10:21 PM
  #4  
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
...
 

Last edited by jbrew; Nov 5, 2012 at 08:49 AM.
Reply
Old Nov 3, 2012 | 10:48 PM
  #5  
jcenter's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2012
Posts: 4
Likes: 0
From: Kodiak, Alaska
Fuel was about 3 months old. I will drain it and change filter tomorrow. Also going to check all of the plugs again.
 
Reply
Old Nov 3, 2012 | 11:19 PM
  #6  
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
...
 

Last edited by jbrew; Nov 5, 2012 at 08:48 AM.
Reply
Old Nov 4, 2012 | 07:24 PM
  #7  
jcenter's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2012
Posts: 4
Likes: 0
From: Kodiak, Alaska
Ok, plugs look good. I checked ohms and voltage check in range as per the HAYNES manual. I unplugged the vac line to the EGR valve and applied suction motor started to run a little rough but at idle but upon acceleration sounded like it should have?
 
Reply




All times are GMT -4. The time now is 04:21 AM.