Sudden loss of MPG?

Thread Tools
 
Search this Thread
 
Old Oct 15, 2009 | 11:09 AM
  #1  
07hamline150's Avatar
Thread Starter
|
Member
Joined: Nov 2007
Posts: 75
Likes: 0
From: Blue Springs, MO
Sudden loss of MPG?

I have an 07 FX4 and was getting around 400 miles out of my 30Gallon tank, did Flowmaster Exhaust, Gotts style intake, and a K&N drop in = 450 miles per tank......

Now I am gettin around 300 miles per tank and my truck is not as responsive as it used to be.... I have 45,000 miles on it and no suspension or wheel/tire mods..... Think I need new spark plugs or to just run a fuel system cleaner?

THanks for the help
 
Reply
Old Oct 15, 2009 | 11:36 AM
  #2  
jethat's Avatar
Senior Member
Joined: Jun 2007
Posts: 5,522
Likes: 6
From: Utah
ethanol winter fuel mix is to partly blame most likely. E10 is government mandated in allot of places we get it here in Salt Lake and my mileage drops by a mile per gallon or so every winter.
Yo still might need a tune up..
 
Reply
Old Oct 15, 2009 | 11:47 AM
  #3  
F150man21's Avatar
Senior Member
Joined: Jan 2009
Posts: 637
Likes: 1
From: PC, FL
change your fuel filter (use MotorCraft)
 
Reply
Old Oct 15, 2009 | 01:28 PM
  #4  
Matts ford's Avatar
Senior Member
Joined: Nov 2007
Posts: 3,271
Likes: 0
From: whaleyville, MD
clean your maf. the oil from the K&N may have gotten on it.
 
Reply
Old Oct 15, 2009 | 01:37 PM
  #5  
04HeritageXL's Avatar
Member
Joined: Jun 2009
Posts: 37
Likes: 0
From: NJ
Originally Posted by Matts ford
clean your maf. the oil from the K&N may have gotten on it.


How do you clean the MAF without damaging it?
 
Reply
Old Oct 15, 2009 | 02:44 PM
  #6  
Matts ford's Avatar
Senior Member
Joined: Nov 2007
Posts: 3,271
Likes: 0
From: whaleyville, MD
with non residue maf cleaners or electronic cleaner. as long as you dont touch it, it wont break the wires.
 
Reply
Old Oct 15, 2009 | 04:15 PM
  #7  
F150man21's Avatar
Senior Member
Joined: Jan 2009
Posts: 637
Likes: 1
From: PC, FL
Originally Posted by 04HeritageXL
How do you clean the MAF without damaging it?
this is for the 97-03's but its the same idea

http://www.fordf150.net/howto/clean-...low-sensor.php

good luck
 
Reply

Trending Topics

Old Oct 15, 2009 | 05:02 PM
  #8  
04HeritageXL's Avatar
Member
Joined: Jun 2009
Posts: 37
Likes: 0
From: NJ
Im not trying to thread jack what so ever just to make that clear, i just want to as some questions for the both of us so we can both use the knowledge given to us without having to seperately ask

that being said, how long after the drop in installation would you suggest cleaning it, and then should it be done periodically afterwards? if so, how incramentally?

thank you

-Fred
 
Reply
Old Oct 15, 2009 | 05:26 PM
  #9  
thejake1989's Avatar
Technical Article Contributor
Joined: Feb 2008
Posts: 8,673
Likes: 0
From: Rosenberg/Baytown TX
Just check it every now and then and when it's dirty clean it. The k&n use the purple oil and when you can't see purple anymore it's a good idea to clean it
 
Reply
Old Oct 15, 2009 | 06:23 PM
  #10  
Faster150's Avatar
Senior Member
Joined: Jan 2005
Posts: 5,389
Likes: 0
From: Fort Worth,Tx
E15 push!
 
Reply




All times are GMT -4. The time now is 04:31 AM.