Want more power
Senior Member
Joined: Apr 2004
Posts: 13,678
Likes: 82
From: missing Texas...
May I ask where you came up with the 450 number? Is that just some number you picked out or have you seen another vehicle you liked the performance of that has 450 HP?
I would think if anybody out there is running a semi-modern Ford pickup with an engine making 450 HP they are likely on this forum. So see what they did and match it. And if nobody's doing it, there's probably a really good reason for that- either technologically or financially.
I would think if anybody out there is running a semi-modern Ford pickup with an engine making 450 HP they are likely on this forum. So see what they did and match it. And if nobody's doing it, there's probably a really good reason for that- either technologically or financially.
Built is making around 475 if I remember right and phil is up there too, Mike Dunn's truck is making over 500 and there's a few more making good power
it's all about the torque and keeping traction, f150xlt is the middle of his engine swap right now and he'll be right up there too
Senior Member
Joined: Oct 2005
Posts: 3,579
Likes: 1
From: Wilmington DE
The most Iv ever seen on here is Neil.I think he ended up with 350RWHP on his build(without a blower). But he paid a great deal of attention to every little detail!
Phil
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Yea, and that never did pan out. Builder screwed him over. All that time, expense and hassle. It's gotta be hard to start over after that. Sucks. Back then just those heads he was running (FoxLakes) were about 4-5 grand alone. Their cheaper now.
Last edited by jbrew; Feb 15, 2009 at 01:14 PM.