Wrench Light
Going down the road the other day and wrench light came on and i had no throttle control what so ever. Coasted off to side of the road cut it off and then back on and everything was fine. Anyone have any ideas?
|
I had a very similar thing happen to me this morning. The only difference, is that I had to restart it twice before it would rev. Engine stalled, started it and it would not go past idle regardless of throttle pedal position.
|
maybe the throttlebody got hot:confused: did you check for any codes?
|
Originally Posted by Good Ole' Boy
(Post 3467641)
Going down the road the other day and wrench light came on and i had no throttle control what so ever. Coasted off to side of the road cut it off and then back on and everything was fine. Anyone have any ideas?
|
fly by wire=garbage..
|
It's a safe mode. Something triggered it. Pinging, fuel pressure, numerous things. More details required.
|
Has happened to me on/off for last few months. With Chicago winter, I decided to get it checked at the dealer. Happened 5x on my 20 minute drive in. Codes I got were:
P0121 - TP Sensor Ckt P2104 - Throttle Actuator Frcd Idle P2111 - Throttle Actuator Frcd Open P2112 - Throttle Actuator Frcd Closed I'll update when I find out. |
Got a quote from the dealer - $420 for a new throttle body installed + $100 diag fee. They needed 2.5 hrs to get the part and the another hr to install.
When I called another local dealer for a quote (and availibility), they asked what air filter I had. When I told them K&N, he recommended using the stock paper till March - since I was probably freezing the components or shooting ice/snow on my MAF sensor. I just dropped the paper one in and will post any updates. |
All times are GMT -4. The time now is 08:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands