i didnt know where to put this so im just going to ask. how can i get my door keypad code without paying the damn dealership 100 bucks to get it for me. heard it was under the dash or somewhere like that. any help would be great.

 

i must have gotten lucky cuz the guy who owned my truck before me wrote it down in the owners manual.

 

Same here. I think the dealers write it in there often.

 

You just need to find the PATS box. They put them in differant spots. I know my 2001 Expedition is under the dash above your left foot. It is printed on that box. I have heard of stickers on the side of the glove box also but the PATS box is a sure thing. I am not sure where your model has it located. Do a search and there is alot of info

 

On my 2001 F-150, there is a silver box up under the dash. I believe it's roughly above the brake pedal. On that silver box is a white sticker with your 5 digit code.

 

my truck is a 04 f-150 four door 4x4

 

04+ f150s, the code is behind the back seat ( A4 )

 

How about for an 01 supercrew? How easy is it to change the code on these things? When I bought the truck earlier this year, I had no idea what the code was, but I thought I had it figured out because it seemed to work more often than not. One time I started hitting a bunch of buttons to get it to work and all of a sudden the lights on the pad started flashing like crazy. Did I change/reset anything doing that?

 

im not sure about the reset procedure. I would consult the owners manual about that one.....

The code should be above your pedals on the firewall area inside the truck

 

do u have to remove the whole seat to get the back of the seat out. is it cliped in or bolted.

 

I have a 2002 SuperCrew and I had the same problem. I went on the hunt for mine after my kids locked my keys inside. It is under the dash right above the e-brake pedal. Just get a flashlight and start looking around. It is a white box with a bunch of wires running to it. As far as changing the code you need to enter in the factory code first. I think there is a little about this in the owner manual. Just thought I would help out...Later..

 

I just found what you're talking about, and the code. I guess I didn't screw anything up, the code worked on the first try.